|
Product complaint # (b)(4).Additional product code: kwp;kwq;mnh;mni;osh.Complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.The investigation could not be completed, no product was received; no conclusion could be drawn at the time of filing this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Device report from synthes reports an event in (b)(6) as follows: it was reported that on (b)(6) 2021 the patient underwent for a posterior spinal fusion treating the twelfth thoracic centrum fracture.During the surgery, it was noticed that after the screw finally fixated, the screw had cut out inward.Also, it was found that the screw at l1 left had backed out.The surgery was completed successfully less than 30-minutes delay.The patient outcome was unknown.This complaint involves two (2) devices.This report is for (1) cortical fix x-tab 6x40mm ti.This is report 1 of 2 (b)(4).
|
|
(b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H3, h6: investigation summary: the product was returned to us cq for evaluation.The us cq team conducted visual inspection of the returned device.No photos or x-rays were provided during the complaint intake.Visual analysis of the returned sample revealed that no damage or anomalies were observed on the cortical fix x-tab 6x30mm ti screw implant.Dimensional analysis was not performed as no visual damages were observed on the device.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications the event described could not be confirmed as the screw implant was returned without detectable damage.Although no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities document/specification review: the relevant drawing reflecting the current and manufactured revision was reviewed.Device history lot: a review of the receiving inspection (ri) for cortical fix x-tab 6x30mm ti was conducted identifying that lot number tbsng was released in a single batch.Batch1: lot qty of (b)(4) were released on (b)(6) 2017 with no discrepancies.As a result, the ri identified no issues during the manufacturing and release of this device that could have contributed to the problem reported by the customer.Device history review: the ri identified no issues during the manufacturing and release of this device that could have contributed to the problem reported by the customer.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|