MAUDE Adverse Event Report: WRIGHTS LANE SYNTHES USA PRODUCTS LLC BENDING TEMPL 22 H F/ 3.5 CRVD RECON PLS; TEMPLATE

Model Number	329.66
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The device has been received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that the bending plates were found to be broken during reverse logistics audit of returned devices.There was no patient involvement and no additional information is available.This report is for one (1) bending template 22 holes f/ 3.5mm curved recon plates.This is report 6 of 7 for (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information, which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Bending template 22 holes f/ 3.5mm curved recon plates (part# 329.66, lot#: l338065, qty# 1) was returned and received at us cq.Upon visual inspection at cq, it is observed, that the template got broken into two pieces.One of the pieces was bent at one end of the plate.Rest of the surface of the device shows normal wear consistent with the device use, which would not contribute to the complaint condition.Thus, the complaint is being confirmed.The complaint is being confirmed, for bending template 22 holes f/ 3.5mm curved recon plates (part# 329.66, lot#: l338065), as the template got broken into two pieces.While a definitive root cause could not be identified for the reported problem.It is possible, that the device might have encountered unintended forces.There was no indication, that a design or manufacturing issue contributed to the complaint.No design issues were observed, during the document/specification review.Based upon these results, no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post market safety surveillance activities.Device history lot: part: 329.660, lot#: l338065, manufacturing site: bettlach, release to warehouse date: 05.April 2017.A manufacturing record evaluation was performed, for the finished device lot number.And no non-conformances were identified.Device history batch: null; device history review: null.Device was used for treatment, not diagnosis.If information is obtained, that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: BENDING TEMPL 22 H F/ 3.5 CRVD RECON PLS
• Common Device Name: TEMPLATE
• Manufacturer (Section D): WRIGHTS LANE SYNTHES USA PRODUCTS LLC; 1302 wrights lane east; west chester PA 19380
• MDR Report Key: 11396511
• Report Number: 2939274-2021-01109
• Device Sequence Number: 1165118
• Product Code: HWT
• UDI-Device Identifier: 10886982192141
• UDI-Public: (01)10886982192141
• Combination Product (Y/N): N
• Initial Reporter State: MA
• Initial Reporter Country: US
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: other
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 02/05/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 329.66
• Device Catalogue Number: 329.66
• Device Lot Number: L338065
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 02/24/2021
• Initial Date Received by Manufacturer: 02/05/2021
• Supplement Date Received by Manufacturer: 03/04/2021
• Initial Report FDA Received Date: 03/01/2021
• Supplement Report FDA Received Date: 03/25/2021
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1