| Model Number |
415062 |
| Medical Device Problem Code |
Fluid/Blood Leak (1250)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
This report has been identified as b.Braun medical internal report number (b)(4).The investigation is ongoing at this time.A follow up will be submitted when the investigation results become available.
|
| |
|
Event or Problem Description
|
|
As reported by the patient: "as i was priming my new extension sets for the week, i once again had the light green female luer attachment uncapped before opening the package on the 6" y extension.I've also experienced mild leaking when infusing between the green female luer and both the ultrasite (415110) or the backcheck flow valve (415062)." no injury reported.
|
| |
|
Additional Manufacturer Narrative
|
|
This report has been identified as b.Braun medical internal report number (b)(4).One photograph was provided for evaluation.The provided photograph displays the valves attached to an extension set, however no defect was observed via the photo.Based on the photograph provided the reported defect was unable to be confirmed.The reported defect of leakage was not confirmed.No root cause could be determined at this time.We will maintain this report for further references and continue to monitor other reports for similar occurrences.If any additional pertinent information becomes available, a follow up will be submitted.
|
| |
|
Additional Manufacturer Narrative
|
|
This report has been identified as b.Braun medical internal report number (b)(4).Two (2) used samples and a photo were provided for evaluation.The provided photo displays the valves attached to an extension set, however no defect was observed in the photo.Visual examination noted that the valves had been bonded to another item on the female luer end.No damage was noted on the threads of either samples.The samples were luer taper tested at the male end with passing results.Both samples were connected to a b braun extension set and pressurized with air, no leakage or disconnection was observed at time of testing.The reported defect was unable to be confirmed.Review of the discrepancy management system (dsms) database was performed for the reported lot number and no abnormalities or non-conformances were noted during the in process or final product inspection.We will maintain this report for further references and continue to monitor other reports for similar occurrences.If any additional pertinent information becomes available, a follow up will be submitted.
|
| |
|
Search Alerts/Recalls
|