|
ETHICON INC. ETHILON SUTURE 30IN(75CM) 5-0 BLK; SUTURE, NONABSORBABLE, SYNTHETIC, POLYAMIDE
|
Back to Search Results |
|
| Model Number |
F2413H |
| Medical Device Problem Code |
Material Separation (1562)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
04/22/2021
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
Product complaint # (b)(4).Component code: (b)(6) device not returned.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Additional information was requested, and the following was obtained: what was being done when the needle came loose from the suture (removal from package / during passage through tissue/ during tying? when the winding former was released the thread was pulled off.Was the needle removed from the patient during the same procedure? no.Were there any unexpected outcomes or complications as a result of this suture needle pull-off event? no.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.A manufacturing record evaluation was performed for the finished device lot, and no non-conformance's were identified.Note: events reported in 2210968-2021-04813.
|
| |
|
Event or Problem Description
|
|
It was reported that a patient underwent an unknown surgery on (b)(6) 2021 and suture was used.During the procedure, the suture got detached from the needle.No adverse patient consequences were reported.Additional information was requested.
|
| |
|
Additional Manufacturer Narrative
|
|
Product complaint # (b)(4).Date sent to the fda: 7/13/2021.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Additional information: d9, h6, h3.Additional h3 investigation summary: h3 investigation summary : one labeled winding former with a needle and suture product code f2413 was returned for analysis.Upon visual analysis of the returned sample revealed that clip off defect was observed in the sample.The barrel hole was examined under 20x magnification and revealed a remnant suture.In addition, the extreme suture was noted to be severely cut.As per returned conditions of the sample no functional test was performed.The clip off defect has been correlated to the manufacturing process classified as class 1 defect.This defect is caused by excessive pressure on the suture during swaging of the needle and consequently breaking.As part of our quality process, the manufacturing records of this lot-serial number were reviewed, and the manufacturing standards were met prior to the release of this batch.Based on the information currently available, the clip off was identified during the investigation of the sample received.This product issue will be addressed through quality system.
|
| |
|
Search Alerts/Recalls
|
|
|