H3, h6: the device, used in treatment, was not returned for evaluation but the pictures were reviewed and the failure mode was confirmed.The clinical/medical investigation concluded that, the single undated, unlabeled x-ray provided reveals the distal portion of the plate is fractured through an unused screw hole, but no bone fracture is appreciated in the provided image.However, without the requested clinical information, pre/post implantation radiographs, trauma history or the device the root cause of the reported fracture cannot be determined.Future medical interventions for the patient are unknown at this time.Therefore, the impact to the patient beyond that which has already been reported is unknown.Should any additional medical information be provided, this complaint would be re-assessed.A review of the manufacturing records did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.A review of complaint history did not reveal additional complaints for the listed batch.A review of the risk management file and instructions for use documents revealed this failure mode was previously identified.At this time, we have no reason to suspect that the product failed to meet any product specifications at the time of manufacture.Some potential probable causes for this event could include but not limited to traumatic injury or surgical technique.Based on this investigation, the need for corrective action is not indicated.Should the device or additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.
|