Model Number 2452-0007 |
Device Problems
Free or Unrestricted Flow (2945); Improper Flow or Infusion (2954)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/04/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
Medical device expiration date: unknown.A device evaluation is anticipated, but has not yet begun.Upon completion of the investigation, a supplemental report will be filed.Device manufacture date: unknown.
|
|
Event Description
|
It was reported that the as lvp 10d 3ss 2cv infused too quickly through the secondary infusion line due to a check valve malfunction, resulting in over-infusion.The following information was provided by the initial reporter: "secondary infusion infused faster than expected.".
|
|
Event Description
|
It was reported that the as lvp 10d 3ss 2cv infused too quickly through the secondary infusion line due to a check valve malfunction, resulting in over-infusion.The following information was provided by the initial reporter: "secondary infusion infused faster than expected.".
|
|
Manufacturer Narrative
|
H6: investigation summary: one primary tubing (model #2452-0007) and one secondary tubing were returned by the customer.It was reported by that the secondary infusion infused faster than expected.The samples were examined for defects and abnormalities.No defects or abnormalities were observed.Functional testing was performed by using a primary bag filled with clear saline which was then used to prime the set.The secondary set was connected to a bag filled with a blue dye/water mixture, and then connected to the primary set.The sets were set up in a secondary infusion configuration with the fluid level of the secondary bag at least 9.5 inches higher than the primary bag fluid level, and all of the clamps closed.The secondary set was primed with the secondary roller clamp fully opened.Fluid flow was controlled using the primary roller clamp.Fluid was found to be flowing normally.No back flow was observed.An infusion was completed using the bd alaris pump (dchu-0010) and pump module (dchu-0013) at 125 ml/hr with a vtbi of 125 ml.Fluid was flowed into an empty beaker.After 1 hour there was about 125 m/l of saline in the beaker.Fluid was flowing normally.No back flow was observed.The failure was unable to be replicated, and the complaint could not be verified.A device history record review could not be performed on model 2452-0007 because a lot number was not provided by the customer.A root cause was unable to be determined because the failure was unable to be replicated.This incident has been added to our database of reported incidents.Our business team regularly reviews the collected data for identification of emerging trends.H3 other text : see h10.
|
|
Search Alerts/Recalls
|