MAUDE Adverse Event Report: SYNTHES GMBH 2.7MM TI VA LCKNG SCR SLF-TPNG WITH T8 STARDRIVE RECESS 26MM; SCREW, FIXATION, BONE

Model Number	04.211.026
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	Appropriate Clinical Signs, Symptoms and Conditions Term/Code Not Available (4581)
Date of Event	01/01/2021
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Additional narrative: only event year is known.Additional device product codes: hrs.Complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.Initial reporter phone number: (b)(6).The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.(b)(4).Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Device report from synthes reports an event in (b)(6) as follows: it was reported that on an unknown date, the patient experienced a post-op screw breakage.The patient was treated for a radius fracture on (b)(6) 2021, with a va-lcp distal two collum plate.The patient supported her arm on the table and the plate secondarily dislocated due to four screws breaking.The patient underwent a revision surgery on (b)(6) 2021.This report involves one (1) 2.7mm ti va lckng scr slf-tpng with t8 stardrive recess 26mm.This is report 5 of 5 for (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H3, h4, h6- the complaint condition can be confirmed based on the image provided.During the investigation, no product design issues, or discrepancies were observed.No manufacturing issues were noted during investigation.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post market safety surveillance activities.Therefore, it has been determined that no corrective and/or preventive action is proposed.Device history lot : part: 04.211.026ts, lot: 7l40272, manufacturing site: selzach, supplier: (b)(4), release to warehouse date: 19 october 2020, expiration date: 01 october 2025.A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: h3, h4, h6: part: 04.211.026ts, lot: 7l4027, supplier: (b)(4), release to warehouse date: 19 october 2020, expiration date: 01 october 2025.Non-sterile, part: 04211.026, lot: 70p5876.Manufacturing location: monument, manufacturing date: 15-sep-2020, part number: 04.211.068, 2.7mm ti va lckng scr slf-tpng with t8 stardrive recess 26mm, lot number: 70p5876 (non-sterile), lot quantity: (b)(4).Two pieces were scrapped in cell at as set-up pieces.Production order traveler met all inspection acceptance criteria apart from two pieces noted.Inspection sheet, in process / inspect dimensional / final inspection, met all inspection acceptance criteria.Packaging label log (pll) lmd was reviewed and determined to be conforming.Packaging bom was reviewed and determined to be conforming with no deviations to normal packaging identified.This lot met all dimensional, visual and packaging criteria at the time of release with no issues documented during the manufacture that would contribute to this complaint condition.Component part(s) reviewed: part number: 04.211.026.999, 2.8mm ti screw blank 26mm 02.7 variable angle w/sd8, lot number: 59p1204, lot quantity: (b)(4), production order traveler met all inspection acceptance criteria.Inspection sheet, inspect warm head blank/inspect turn head and point, met all inspection acceptance criteria.Part number: 23032, tialnbci2.78.Lot number: h782064 lot quantity: (b)(4) lbs.Certified test report was reviewed and determined to be conforming.Lot summary report dated (b)(6) 2018 met all inspection acceptance criteria.Raw material receiving/putaway checklist met all inspection acceptance criteria.This lot met all dimensional, visual and packaging criteria at the time of release with no issues documented during the manufacture that would contribute to this complaint condition.Visual inspection: va lockscr ã¸2.7 he 2.4 self-tap l26 tan (part# 04.211.026ts, lot# 7l40272 ,qty# (b)(4) was returned and received at us customer quality cq.Upon visual inspection at cq, it is observed that the screw was broken at the neck also the broken piece was also received, and no other issues were identified.Device failure / defect identified? yes.Dimensional inspection: dimensional inspection of the received device was not performed at cq due to post manufacturing damage.Document/specification review: -2.7mm variable angle locking screw self- tapping, star drive recess no design issues or discrepancies were found during this investigation.Complaint confirmed? yes.Investigation conclusion: the complaint is being confirmed for va lockscr ã¸2.7 he 2.4 self-tap l26 tan (part# 04.211.026ts, lot# 7l40272 ,qty# (b)(4).While a definitive root cause could not be identified for the reported problem, it is possible that the device might have encountered unintended forces.There was no indication that a design or manufacturing issue contributed to the complaint.No design issues were observed during the document/specification review.Based upon these results, no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post market safety surveillance activities.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: 2.7MM TI VA LCKNG SCR SLF-TPNG WITH T8 STARDRIVE RECESS 26MM
• Common Device Name: SCREW, FIXATION, BONE
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• MDR Report Key: 12135533
• Report Number: 8030965-2021-05633
• Device Sequence Number: 4131082
• Product Code: HWC
• UDI-Device Identifier: 10886982119056
• UDI-Public: (01)10886982119056
• Combination Product (Y/N): N
• Initial Reporter Country: GM
• PMA/510(K) Number: K100776
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2021
• Device Explanted Year: 2021
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: company representative,foreig
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 06/25/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 10/01/2025
• Device Model Number: 04.211.026
• Device Catalogue Number: 04.211.026TS
• Device Lot Number: 7L40272
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/07/2021
• Initial Date Received by Manufacturer: 06/25/2021
• Supplement Date Received by Manufacturer: 07/27/2021; 10/07/2021
• Initial Report FDA Received Date: 07/08/2021
• Supplement Report FDA Received Date: 07/28/2021; 10/21/2021
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: CORTSCR Ø2.7 SELF-TAP L14 TAN; VA LOCKSCR ø2.7 HE 2.4 SELF-TAP L16 TAN; VA LOCKSCR ø2.7 HE 2.4 SELF-TAP L16 TAN; VA LOCKSCR ø2.7 HE 2.4 SELF-TAP L20 TAN; VA LOCKSCR ø2.7 HE 2.4 SELF-TAP L20 TAN; VA LOCKSCR ø2.7 HE 2.4 SELF-TAP L20 TAN; VA LOCKSCR ø2.7 HE 2.4 SELF-TAP L20 TAN; VA LOCKSCR Ø2.7 HEAD 2.4 SELF-TAP L14 TA; VA LOCKSCR Ø2.7 HEAD 2.4 SELF-TAP L16 TA; VA-LCP-2-COLUMN DRP2.4 VOLAR R SHAFT 5HO; VA-LCP-2-COLUMN DRP2.4 VOLAR R SHAFT 5HO
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 69 YR