Model Number N/A |
Device Problem
Component Missing (2306)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/18/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
Implanted date: device was not implanted.Explanted date: device was not explanted.The actual device has been returned for evaluation.The investigation is currently ongoing.A follow up report will be submitted once the investigation is complete.A review of the device history record of the product code/lot# combination was conducted with no findings.
|
|
Event Description
|
The user facility reported that the 9fr introducer kit (ik) device was missing the piece that keeps the blood from coming out.The procedure was an angiogram.Another device was opened to continue procedure.There was no medical intervention required.Additional information was received on (b)(6) 2021.The scrub tech stated that the device looked different however, thought it was a new model.The missing component was confirmed the be the valve at the base of the hub.They stated it did not become dislodged during use, it was already missing when opened.During the procedure the blood leakage was minimal and was less than 250cc.The patient was in stable condition.The procedure was completed as intended with the second device used.The issue was discovered before advancing the wires.
|
|
Manufacturer Narrative
|
This report is being submitted as follow up no.1 to update section h3, and to provide the completed investigation results.One 9fr introducer sheath was returned for product evaluation.The sheath was subjected to visual analysis and it was noted that the valve was missing from inside the hub.It had dislodged from its intended position; the valve was found inside the sheath tubing at about 1.5 cm from the sheath hub.The complaint can be confirmed for mechanical damage.Based on the investigation results, the likely cause of the event is the dilator was inserted off-center into the hub, dislodging the valve from its intended orientation.It is likely the crosscut valve was dislodged from the hub causing the leakage.The device was in a conforming state when released from terumo control.There is no indication that any manufacturing issues may have led to this event.Currently no action is recommended since this risk evaluation is within the predetermined limits in the fmea.
|
|
Search Alerts/Recalls
|