SMITH & NEPHEW, INC. TRIGEN LOW PROFILE SCREW 5.0MM X 50MM; ROD, FIXATION, INTRAMEDULLARY AND ACCESSORIES
|
Back to Search Results |
|
Model Number 71645050 |
Device Problems
Break (1069); Fracture (1260)
|
Patient Problems
Failure of Implant (1924); Necrosis (1971); Pain (1994); Non-union Bone Fracture (2369)
|
Event Date 03/07/2019 |
Event Type
Injury
|
Manufacturer Narrative
|
(b)(4).
|
|
Event Description
|
It was reported that after a trigen intertan system was implanted on plaintiff left femur on (b)(6) 2018, the plaintiff experienced increased pain on left knee.By x-rays, failure of the distal locking screws and distal migration of the tip of the nail were found.A revision surgery was performed on (b)(6) 2019 to treat these adverse events.During surgery, it was found that the proximal ends of 2 distal locking screws were broken.The trigen intertan components were explanted.The patient outcome is unknown.
|
|
Manufacturer Narrative
|
H3, h6: the device, used in treatment, was not returned for evaluation.The images provided were reviewed and confirm the migration.The clinical/medical investigation concluded that, the provided analysis of the two undated, unlabeled radiograph photos were reviewed and do not confirm the root cause of the reported failure of the distal locking screws and distal migration of the tip of the nail.However, it cannot be definitively concluded that the patient¿s necrotic bone condition and/or the persistent femoral fracture contributed to the reported event.The assessed patient impact was reported increasing left knee pain and the revision; however, reportedly the patient¿s outcome post revision is unknown.Should further clinically relevant documentation/information become available and/or a product id/evaluation results in findings which are deemed clinically relevant, the clinical/medical task may be re-evaluated.At this time, we have no reason to suspect that the product failed to meet any product specifications at the time of manufacture.Factors and/or some potential probable causes that could contribute to the reported event have been identified as abnormal motion over time, bone degeneration, fit/sizing, lack of ingrowth and/or traumatic injury.Based on this investigation, the need for corrective action is not indicated.Without the return of the actual product involved, our investigation could not proceed.Should the device or additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.
|
|
Event Description
|
It was reported that after a trigen intertan system was implanted on plaintiff left femur on (b)(6) 2018, the plaintiff experienced increased pain on left knee.By x-rays, failure of the distal locking screws, distal migration of the tip of the nail and nonunion of left subtrochanteric femur were found.A revision surgery was performed on (b)(6) 2019 to treat these adverse events.Intraoperatively, it was found that the proximal ends of 2 distal locking screws were broken.The trigen intertan components were explanted.The patient outcome is unknown.
|
|
Manufacturer Narrative
|
The device was not returned for evaluation but the pictures were reviewed, and the breakage was confirmed.The clinical/medical investigation concluded that, the provided analysis of the two undated, unlabeled radiograph photos were reviewed and do not confirm the root cause of the reported failure of the distal locking screws and distal migration of the tip of the nail.Its unknown if using the screws with a 3rd party carbon fiber nail played a role.It cannot be definitively concluded that the patient¿s necrotic bone condition and/or the persistent femoral fracture contributed to the non-union and ultimate broken components.The assessed patient impact was reported increasing left knee pain and the revision; however, reportedly the patient¿s outcome post revision is unknown.Should further clinically relevant documentation/information become available and/or a product id/evaluation results in findings which are deemed clinically relevant, the clinical/medical task may be re-evaluated.A review of complaint history for the previous 24 months did not reveal similar events for the listed device.A review of the instructions for use documents for fracture fixation devices revealed that breaking implant components has been identified as warnings.A review of the risk management file revealed this failure mode was previously identified.The anticipated risk level is still adequate.A historical review concluded that there are no prior actions related to this product and event.At this time, we have no reason to suspect that the product failed to meet any product specifications at the time of manufacture.Some potential probable causes for this event could include but not limited to traumatic injury, surgical technique or patient¿s necrotic bone condition.The contribution of the device to the reported event could be corroborated with the radiograph photos since they show the breakage of the screws and a revision surgery was required.Based on this investigation, the need for corrective action is not indicated.Should the device or additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.
|
|
Search Alerts/Recalls
|
|
|