|
Model Number DIU150 |
Device Problems
Break (1069); Failure to Advance (2524)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 08/26/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
Age, weight and ethnicity: unknown, not provided.If implanted; give date: n/a.(not applicable).The lens was not implanted and a back up lens was used.If explanted; give date: n/a (not applicable).The lens was not implanted so not explanted.Device evaluation: product evaluation was not performed because the product has not been returned.The complaint issue reported could not be verified and no product deficiency could be identified.Manufacturing records review: the manufacturing records for the product were reviewed.The product was manufactured and released according to specification.Historical data analysis: a search of complaints revealed no other complaints have been received for this production order number.Conclusion: as a result of the investigation there is no indication of a quality product deficiency and the reported issue could not be verified.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Event Description
|
It was reported that the tecnis eyhance preloaded intraocular lens (iol) inserter system seemed to crack when turned and the iol felt rock hard and cracked even after hydration.The surgeon was unable to implant into the patient's eye and had to use a competitive product.No patient injury was reported.No additional information was provided.
|
|
Manufacturer Narrative
|
Additional info: section d9: device available for evaluation? yes.Section d9: returned to manufacturer on: 11/4/2021.Device evaluation: the complaint simplicity and lens was received in plastic bag.Visual inspection under magnification revealed viscoelastic residue on the haptics and optic body of the complaint lens.Further inspection revealed a detached haptic and lens damage.A detached haptic was received with the iol that belonged to a different lens.Inspection under magnification, of the cartridge revealed, trace amounts of viscoelastic residue inside of the cartridge.The cartridge was observed to have a crack on the tube and the cartridge tip.The cartridge was also observed to be damaged (bent).The complaint issue lens damage was confirmed; however, this may be attributed to using an inadequate amount of ovd, suggested by the trace amounts found in the cartridge.The complaint issue device advancement issue could not be confirmed.Therefore, no product deficiency could be identified.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Search Alerts/Recalls
|
|
|