| Model Number |
3125-1200S |
| Medical Device Problem Code |
Adverse Event Without Identified Device or Use Problem (2993)
|
| Health Effect - Clinical Code |
Hip Fracture (2349)
|
| Date of Event |
09/21/2021
|
|
Type of Reportable Event
|
Serious Injury
|
|
Additional Manufacturer Narrative
|
|
The device will not be returned.If additional information becomes available, it will be provided in a supplemental report.Device disposition is unknown.
|
| |
|
Event or Problem Description
|
|
As reported: cutout of proximal femoral restoration with gamma3 u-blade, u-blade is bent, removal difficult.
|
| |
|
Event or Problem Description
|
|
As reported: cutout of proximal femoral restoration with gamma3 u-blade, u-blade is bent, removal difficult.
|
| |
|
Additional Manufacturer Narrative
|
|
The reported event was confirmed based on the damages of returned units.Provided x-rays did not show alleged cut out.They presented the nail tip and a prosthesis.When returned the u-blade set was completely jammed in the proximal drill hole of the nail.The lag screw had become stuck at the inferior transition from thread to shaft.One ¿blade¿ of the u-blade ¿ in inferior position ¿ was embedded in the corresponding flute of the lag screw.The other one was bent in approx.45° towards superior and in similar manner towards the right (view from lateral).Inside the nail the ¿blade¿ was embedded in the lag screw¿s flute.The review of manufacturing documents revealed no deficiency.The product was according to specs when distributed.No nc/capa had been filed for the item in question.Potential cut-out had been considered in the risk management file.The labelling informs about protentional adverse effects.Considering the appearance of the stuck blade ¿ bent in different directions ¿ it was concluded the blade followed the turning movement of the femur head fragment during the process of cutting out.This in turn led to jam of the construct lag screw / u-blade as the u-blade could no longer follow the groove in the lag screw.The final attempt of pulling both lag screw and u-blade out of the nail remained without avail.With available information the root cause of cut-out was regarded to bone deficiencies which would be patient factors.In case more substantive information becomes available we reserve the right to re-open the investigation with root cause assessment.
|
| |
|
Search Alerts/Recalls
|