MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX® LUBRI-SIL® I.C. ALL-SILICONE FOLEY CATHETER

Model Number	A300416A
Medical Device Problem Code	Difficult to Remove (1528)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	09/29/2021
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.
Event or Problem Description
It was reported that the foley catheter was failed to flow and failed to deflate.
Additional Manufacturer Narrative
The reported event was inconclusive due to poor sample condition.It is unknown whether the device had met relevant specifications.The product was used for patient treatment.It was unknown whether the product had caused the reported failure.Visual evaluation of the returned sample noted one opened (without original packaging), used temperature sensing silicone foley catheter.Visual inspection of the sample noted the inflation valve was cut off of the catheter upon return.The catheter was flushed with no issues noted.This meet specification stating that "funnel must not have distortions or bent at shaft connection with the funnel.Further inspection of the sample could not be tested due to poor sample condition.The device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use were found adequate and state the following: "warning: on catheter, do not use ointments or lubricants having petrolatum base.They will damage silicone and may cause the balloon to burst.After use, this product may be potential biohazard, handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Caution: federal (u.S.A) law restricts this device to sale by or on the order of a physician.Do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Note: aggressive traction, particularly in the presence of suturing, is not recommended for 100%silicone foley catheters, sterile unless package is opened or damaged.Single patient use only.Do not reuse.Do not resterilize.For urological use only.Valve type: use luer slip syringe.Do not use needle.Catheters should be replaced in accordance with the cdc guideline" guideline for prevention of catheter-associated urinary tract infection, catheter encrustation, or any other catheter-related adverse effect, the catheter should be replaced.To deflate catheter balloon: gently insert a syringe in the catheter valve.Never use more force than is required to make the syringe "stick" in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use.Recommended inflation capacities 5cc balloon: use 10cc sterile water.30cc balloon: use 35cc sterile water.Do not exceed recommended capacities." h11: section a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
Event or Problem Description
It was reported that the foley catheter was failed to flow and failed to deflate.

• Brand Name: BARDEX® LUBRI-SIL® I.C. ALL-SILICONE FOLEY CATHETER
• Common Device Name: FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer (Section G): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer Contact: yonic anderson ; 8195 industrial blvd; covington 30014 ; 7707846100
• MDR Report Key: 12674197
• Report Number: 1018233-2021-06527
• Device Sequence Number: 7821413
• Product Code: EZL
• UDI-Device Identifier: 00801741073762
• UDI-Public: (01)00801741073762
• Combination Product (Y/N): N
• Initial Reporter State: TX
• Initial Reporter Country: US
• PMA/510(K) Number: K040504
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Other,Health Professional,User Facility
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date (Section B): 04/19/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 08/26/2025
• Device Model Number: A300416A
• Device Catalogue Number: 1758SI16
• Device Lot Number: NGEV0311
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 09/29/2021
• Supplement Date Received by Manufacturer: 04/19/2022
• Initial Report FDA Received Date: 10/21/2021
• Supplement Report FDA Received Date: 05/12/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 08/27/2020
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Other
• Patient Sex: Unknown