Additional device product code: hrx.Complainant part is not expected to be returned for manufacturer review/investigation.Location: supplier: (b)(4) / inspected and packaged by: (b)(4).Release to warehouse date: 09-aug-2021.Expiration date: 30-jun-2031.Part number: 03.404.020s, 12.0mm reamer head for ria 2-sterile.Lot number: 296p653 (sterile).Lot quantity: (b)(4).Production order traveler met all inspection acceptance criteria.Packaging label log (pll) lppf, lmd was reviewed and determined to be conforming.Packaging bom was reviewed and determined to be conforming with no deviations to normal packaging identified.Scn was reviewed and it was found that the incorrect certificate of processing had been attached to the scn.The results as documented within the remainder of the scn, however, were conforming.This lot met all dimensional, visual, sterility and packaging criteria at the time of release with no issues documented during the inspection or release of the product that would contribute to this complaint condition.Component part(s) reviewed: part number: 03.404.M020, ria 2 reamer head 12.0mm.Lot number: 80p5319.Lot quantity: (b)(4).Inspection instruction met all inspection acceptance criteria.Inspection sheet, incoming final inspection, met all inspection acceptance criteria.Certificate of compliance dated (b)(6) 2020 was reviewed and determined to be conforming.Certification for heat treat dated (b)(6) 2020 was reviewed and determined to be conforming.Certificate of compliance dated (b)(6) 2020 was reviewed and determined to be conforming.Raw material certification dated (b)(6) 2019 was reviewed and determined to be conforming.This lot met all dimensional, visual, sterility and packaging criteria at the time of release with no issues documented during the manufacture that would contribute to this complaint condition.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
It was reported that on (b)(6) 2021, during an unknown procedure, while reaming, the reamer irrigator aspirator (ria) 2 reaming tip disconnected and lodge in the distal tibia.It was easily removed without any other intervention and no adverse events occurred.The procedure was successfully completed with no surgical delay reported.No patient consequence.This report is for one (1) 12.0mm reamer head for ria 2 sterile.This is report 1 of 1 for complaint (b)(4).
|
Product complaint # (b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: d9: complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|