CONCORD MANUFACTURING 2008T HD SYS. CDX W/BIBAG BLUE STAR; DIALYZER, HIGH PERMEABILITY WITH OR WITHOUT SEALED DIALYSATE SYSTEM
|
Back to Search Results |
|
Model Number 191126 |
Device Problem
Thermal Decomposition of Device (1071)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 11/10/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
Plant investigation: no parts were returned to the manufacturer for physical evaluation.Additionally, no on-site evaluation was performed by a fresenius field service technician (fst).A records review was performed on the reported serial number.An investigation of the device manufacturing records was conducted by the manufacturer.There were no non-conformances, or any associated rework identified during the manufacturing process which could be related to the reported event.In addition, the device history record (dhr) review confirmed the results of the in-progress and final quality control (qc) testing met all requirements.The investigation into the cause of the reported problem was not able to be confirmed.A definitive conclusion regarding the complaint incident cannot be reached without a physical examination of the complaint device.
|
|
Event Description
|
A biomedical technician (biomed) at a user facility reported that a fresenius 2008t hemodialysis (hd) machine had a burned bibag interface board and ribbon cable.The biomed was performing a bleach disinfection on the machine when bleach spilled onto the board and ribbon cable from a leak in the bibag transducer line.The bibag interface board and ribbon cable were burned and a burning smell was produced.A patient was not connected to the machine at the time of the incident and there was no harm to any patients or individuals because of this malfunction.The machine has approximately 2,272 hours and the bibag interface board and ribbon cable were the original fresenius parts on the machine.The biomed reported that there was no damage observed on any other components, or any other additional issues, associated with the burned bibag interface board.The biomed replaced the bibag interface board and ribbon cable, which resolved the issue.The unit was returned to service at the user facility without issue and without reoccurrence of the event.The complaint samples were discarded by the biomed and is not available to be returned to the manufacturer for physical evaluation.
|
|
Search Alerts/Recalls
|
|
|