• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: FISHER & PAYKEL HEALTHCARE LTD INFANT DUAL HEATED EVAQUA2 BREATHING CIRCUIT; BZE

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

FISHER & PAYKEL HEALTHCARE LTD INFANT DUAL HEATED EVAQUA2 BREATHING CIRCUIT; BZE Back to Search Results
Model Number RT266
Device Problems Leak/Splash (1354); Output Problem (3005)
Patient Problem No Clinical Signs, Symptoms or Conditions (4582)
Event Type  malfunction  
Manufacturer Narrative
(b)(4).The complaint rt266 infant dual-heated evaqua2 breathing circuits are currently en route to fisher & paykel healthcare (f&p) for evaluation.We will provide a follow up report upon completion of investigation.
 
Event Description
A healthcare facility in (b)(6) reported via a fisher & paykel healthcare (f&p) field representative, that the dryline of ten rt266 infant dual-heated evaqua2 breathing circuits were found with incorrect connectors.There was no patient involvement.
 
Event Description
A healthcare facility in connecticut reported via a fisher & paykel healthcare (f&p) field representative, that the dryline of ten rt266 infant dual-heated evaqua2 breathing circuits were found with incorrect connectors.There was no patient involvement.
 
Manufacturer Narrative
Ps(b)(4).Method: the complaint rt266 infant dual-heated evaqua2 breathing circuits were returned to fisher & paykel healthcare (f&p) in new zealand, where they were visually inspected.Results: visual inspection of the complaint rt266 infant dual-heated evaqua2 breathing circuits revealed the incorrect connectors were found assembled to the ventilator side of the dryline.Conclusion: the connector was incorrectly assembled during production.An incorrectly assembled circuit would be detected prior to use on a patient, either during set up (cannot connect) or during the pre-functional set up tests (fails leak and pressure test).Our user instructions that accompany the rt266 infant dual heated evaqua2 breathing circuit state "perform a pressure and leak test on the breathing system and check for occlusions before connecting to a patient".Our user instructions also state the following: - "check all connections are tight before use." - "visually inspect breathing sets for damage (e.G.A crushed tube or cracked connector) before use and replace if damaged." - "ensure appropriate ventilator or flow source alarms are set before connecting breathing set to patient.".
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
INFANT DUAL HEATED EVAQUA2 BREATHING CIRCUIT
Type of Device
BZE
Manufacturer (Section D)
FISHER & PAYKEL HEALTHCARE LTD
15 maurice paykel place
east tamaki
auckland, 2013
NZ  2013
Manufacturer (Section G)
FISHER & PAYKEL HEALTHCARE LTD
15 maurice paykel place
east tamaki
auckland, 2013
NZ   2013
Manufacturer Contact
faranak gomarooni
17400 laguna canyon road
suite 300
irvine, CA 92618
9494534000
MDR Report Key12901048
MDR Text Key282819632
Report Number9611451-2021-01356
Device Sequence Number1
Product Code BZE
UDI-Device Identifier09420012431103
UDI-Public(01)09420012431103(10)2101744313(11)210805
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K103767
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type User Facility,Company Representative
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 11/04/2021
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberRT266
Device Catalogue NumberRT266
Device Lot Number2101744313
Was Device Available for Evaluation? Device Returned to Manufacturer
Is the Reporter a Health Professional? No
Initial Date Manufacturer Received 11/04/2021
Initial Date FDA Received11/30/2021
Supplement Dates Manufacturer Received06/07/2022
Supplement Dates FDA Received06/07/2022
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured08/05/2021
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-