MAUDE Adverse Event Report: MEDOS INTERNATIONAL SARL HD EPSCP,4.0,30,167,MITEK; RIGID ENDOSCOPE

Model Number 242018

Device Problem Display or Visual Feedback Problem (1184)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 12/02/2021

Event Type  malfunction  

Manufacturer Narrative

Additional narrative: udi: (b)(4).To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.

Event Description

It was reported by the customer that during an arthroscopy surgery on (b)(6) 2021, it was observed that the hd epscp,4.0,30,167,mitek endoscope device appeared dark.Another like device was used to complete the procedure.There were no adverse patient consequences nor surgical delay reported.No additional information was provided.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.The actual device has been returned and is currently pending evaluation.Once the device has been evaluated, a supplemental medwatch report will be sent accordingly.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary: the complaint device was received at the manufacturing site and evaluated.Per service reports, this complaint can be confirmed.During the service evaluation the following defects were identified: outer tube damaged- bent/dented; distal tip damaged - shaver damage to distal tip; distal tip has deposits; minor scratches on the unit.The defective pats were replaced to resolve the issues.After repair, the device was found to be working according to the specifications.The faulty parts was identified as the root cause for the device failure during the service evaluation.Manufacturing record evaluation is not required as the reported event is not associated with the manufacturing process and/or the potential cause of the defect cannot be associated to manufacturing.At this point in time, no corrective action is required, and no further action is warranted.Depuy mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.Device history lot: manufacturing record evaluation is not required as the reported event is not associated with the manufacturing process and/or the potential cause of the defect cannot be associated to manufacturing.

• Brand Name: HD EPSCP,4.0,30,167,MITEK
• Type of Device: RIGID ENDOSCOPE
• Manufacturer (Section D): MEDOS INTERNATIONAL SARL; chemin blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer Contact: kara ditty-bovard ; chemin-blanc 38; le locle CH-24-00 ; SZ CH-2400 ; 6013142063
• MDR Report Key: 12970726
• MDR Text Key: 285169706
• Report Number: 1221934-2021-03669
• Device Sequence Number: 1
• Product Code: HRX
• UDI-Device Identifier: 10886705029150
• UDI-Public: 10886705029150
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K080560
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 12/02/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/09/2021
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 242018
• Device Catalogue Number: 242018
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/23/2021
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/24/2022
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1