MAUDE Adverse Event Report: ETHICON INC. ETHLN BLK 18IN 4-0 S/A P-3 PRM MP; SUTURE, NONABSORBABLE, SYNTHETIC, POLYAMIDE

Model Number	699G
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/02/2021
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that a patient underwent an unknown dental and oral surgery on (b)(6), 2021 and suture was used.During the procedure, the needle detached from the suture.No adverse patient consequences were reported.Additional information was requested.
Additional Manufacturer Narrative
(b)(4).Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 01/14/2022.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc., or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H3 evaluation: one opened sample of product code 699g was returned for analysis.Upon visual analysis of the returned sample revealed that a clip off defect was observed in the sample.The barrel hole was examined under 20x magnification and revealed a remnant suture.In addition, the extreme suture was noted to be severely cut.As per returned conditions of the sample no functional test was performed.This defect is caused by excessive pressure on the suture during swaging of the needle and consequently breaking.Based on the information currently available, the clip off was identified during the investigation of the sample received.This product issue will be addressed through quality system.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of post-market surveillance.,according to the information received, during an unknown dental and oral surgery, the needle was detached from the suture during use.The product was returned for evaluation.Visual analysis of the returned product revealed that a paper lid, an empty winding former, and a suture piece of product code 699g were received for evaluation.The needle was not received for evaluation, and during the visual inspection of the suture, the ends were cutted appears to be by use of the surgical instrument.As with any device, care should be taken to avoid damage to the strand when handling.Avoid the crushing or crimping action of the surgical instruments, such as needle holders and forceps.As part of our quality process, the manufacturing records of this lot-serial number were reviewed, and the manufacturing standards were met prior to the release of this batch.The condition of the sample received indicates improper handling of the device.It should be noted that as part of our quality process, each batch is randomly inspected and functionally tested during manufacturing to ensure the device meets the required specifications prior to shipment.A manufacturing record evaluation was performed for the finished device, and no non-conformances were identified.

• Brand Name: ETHLN BLK 18IN 4-0 S/A P-3 PRM MP
• Common Device Name: SUTURE, NONABSORBABLE, SYNTHETIC, POLYAMIDE
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-SAN LORENZO PR; road 183, km. 8.3; san lorenzo PR
• Manufacturer Contact: elba bello ; 1000 route 202; raritan, NJ 08869
• MDR Report Key: 13019653
• Report Number: 2210968-2021-12656
• Device Sequence Number: 11962998
• Product Code: GAR
• UDI-Device Identifier: 10705031008625
• UDI-Public: 10705031008625
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: K946173
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,User Facility,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 12/16/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 03/31/2026
• Device Model Number: 699G
• Device Catalogue Number: 699G
• Device Lot Number: RDBDRU
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/22/2021
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 11/22/2021
• Supplement Date Received by Manufacturer: 12/22/2021
• Initial Report FDA Received Date: 12/16/2021
• Supplement Report FDA Received Date: 01/14/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 04/21/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown