MAUDE Adverse Event Report: EIT EMERGING IMPLANT TECHNOLOGIES GMBH IMPLANT INSERTER SH CONNECTION; INTERVERTEBRAL FUSION DEVICE WITH BONE GRAFT, LUMBAR

Model Number	AET30101
Medical Device Problem Code	Device-Device Incompatibility (2919)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Device report from synthes reports an event in (b)(6) as follows: it was reported that on an unknown date, after inserting the implant, the surgeon could not detach the inserter from the implant.It had to be completely removed again and canceled.There was a twenty five (25) minute surgical delay.This report is for one (1) implant inserter sh connection.This is report 1 of 2 for pc-(b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d4: lot d9 h3, h4, h6: part # aet30101 lot # e19di1200 supplier: eit ¿ batch1: lot qty of 360 units were released on june 5, 2020 with no discrepancies.No ncrs were generated during production.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample did not identified any product defect for implant inserter sh connection.Only the inserter instrument was returned, the mating implant was not returned for evaluation.The dimensional inspection could not performed due to the inaccessibility of all components as the device components could not be disassembled.A functional test was performed to disassemble the implant inserter sh connection and it was unsuccessful.It was observed that the device would not tighten or loosen, remaining in the same state.The complaint condition was able to be replicated.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the implant inserter sh connection would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: IMPLANT INSERTER SH CONNECTION
• Common Device Name: INTERVERTEBRAL FUSION DEVICE WITH BONE GRAFT, LUMBAR
• Manufacturer (Section D): EIT EMERGING IMPLANT TECHNOLOGIES GMBH; eisenbahnstrasse 84; wurmlingen D-785 73
• Manufacturer (Section G): EIT EMERGING IMPLANT TECHNOLOGIES GMBH; GM
• Manufacturer Contact: kara ditty-bovard ; chemin-blanc 38; le locle 02400 ; SZ 02400 ; 6103142063
• MDR Report Key: 13391894
• Report Number: 3013730328-2022-00012
• Device Sequence Number: 14419917
• Product Code: MAX
• UDI-Device Identifier: 04260557774786
• UDI-Public: (01)04260557774786
• Combination Product (Y/N): N
• Initial Reporter Country: SZ
• PMA/510(K) Number: K172888
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: AET30101
• Device Catalogue Number: AET30101
• Device Lot Number: E19DI1200
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 01/03/2022
• Supplement Date Received by Manufacturer: 03/21/2022
• Initial Report FDA Received Date: 01/31/2022
• Supplement Report FDA Received Date: 03/24/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 06/05/2020
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: UNKNOWN CAGE/SPACER
• Patient Sex: Unknown