MAUDE Adverse Event Report: WRIGHTS LANE SYNTHES USA PRODUCTS LLC DEPTH GAUGE FOR 2.0MM AND 2.4MM SCREWS; GAUGE, DEPTH

Model Number 319.006

Device Problem Break (1069)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Type  malfunction  

Manufacturer Narrative

Product complaint # (b)(4).Complainant part is expected to be returned for manufacturer review/investigation but has yet to be received.Reporter is a j&j sales representative.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

It was reported that on an unknown date, the depth gauge was discovered bent/broken.The issue was discovered upon inspection of the locking compression plate mini frag set in the sterile processing department.There was no patient involvement.This complaint involves one(1) device depth gauge for 2.0mm and 2.4mm screws.This is report 1 of 1 for complaint (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H3, h6: a product investigation was conducted.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the depth gauge f/scr ø2+2.4 meas-range up-t was found to have the needle component broken off the device.All the components were returned.No other issues were observed.A dimensional inspection for the depth gauge f/scr ø2+2.4 meas-range up-t was unable to be performed due to post manufacture damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the depth gauge f/scr ø2+2.4 meas-range up-t would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.H3, h4, h6: a device history record (dhr) review was conducted: part # 319.006, synthes lot # 7370091, supplier lot # n/a, release to warehouse date: 08 may 2013, manufacturing location: monument/jennersville.No ncr's were generated during production.Review of the device history record(s) showed that there were no issues during the manufacture of this product, and any sub-components, which would contribute to this complaint condition.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: DEPTH GAUGE FOR 2.0MM AND 2.4MM SCREWS
• Type of Device: GAUGE, DEPTH
• Manufacturer (Section D): WRIGHTS LANE SYNTHES USA PRODUCTS LLC; 1302 wrights lane east; west chester PA 19380
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kara ditty-bovard ; 1302 wright lane east; west chester, PA 19380 ; 6107195000
• MDR Report Key: 13623328
• MDR Text Key: 286885190
• Report Number: 2939274-2022-00711
• Device Sequence Number: 1
• Product Code: HTJ
• UDI-Device Identifier: 10886982189943
• UDI-Public: (01)10886982189943
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date: 02/28/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 319.006
• Device Catalogue Number: 319.006
• Device Lot Number: 7370091
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Initial Date Manufacturer Received: 02/01/2022
• Initial Date FDA Received: 02/28/2022
• Supplement Dates Manufacturer Received: 03/01/2022; 03/28/2022
• Supplement Dates FDA Received: 03/01/2022; 03/29/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 05/08/2013
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1