MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX® ALL-SILICONE FOLEY CATHETER

Model Number	166816
Medical Device Problem Code	Fluid/Blood Leak (1250)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	03/07/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.
Event or Problem Description
It was reported that the user experienced symptomatic urinary tract infection, pain and leakage when they were asked of complications while using the foley catheter.It was unknown what medical intervention was provided for symptomatic urinary tract infection.
Additional Manufacturer Narrative
The reported event was inconclusive.No sample was returned for evaluation.A potential root cause for this failure could be "bad fit with shaft".The lot number was unknown; therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: ¿warning: do not use ointments or lubricants having a petrolatum base.They will damage silicone.Visually inspect the product for any imperfections or surface deterioration prior to use.Use luer tip syringe to inflate with stated ml of sterile water.Or for pre-filled products, remove clip and squeeze reservoir to inflate with stated ml of sterile water.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.For urological use only.Do not use if package is damaged.Bard, bardex, bardia, biocath and lubricath are trademarks and/or registered trademarks of c.R.Bard, inc.Single use only.Do not resterilize consult instructions for use.Manufacturer: to deflate catheter balloon: gently insert a luer slip tip syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.Allow the pressure within the balloon to force the plunger back and fill the syringe with water.If you notice slow or no deflation, re-seat the syringe gently.Use only gentle aspiration to encourage deflation if needed.Vigorous aspiration may collapse the inflation lumen, preventing balloon deflation.If necessary, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.This is a single use device.Do not resterilize any portion of this device.Reuse and/or repackaging may create a risk of patient or user infection, compromise the structural integrity and/or essential material and design characteristics of the device, which may lead to device failure, and/or lead to injury, illness or death of the patient.¿ h11: section a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
Event or Problem Description
It was reported that the user experienced symptomatic urinary tract infection, pain and leakage when they were asked of complications while using the foley catheter.It was unknown what medical intervention was provided for symptomatic urinary tract infection.

• Brand Name: BARDEX® ALL-SILICONE FOLEY CATHETER
• Common Device Name: FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer (Section G): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer Contact: yonic anderson ; 8195 industrial blvd; covington 30014 ; 7707846100
• MDR Report Key: 13970662
• Report Number: 1018233-2022-01842
• Device Sequence Number: 4612383
• Product Code: GBM
• UDI-Device Identifier: 00801741029806
• UDI-Public: (01)00801741029806
• Combination Product (Y/N): N
• Initial Reporter Country: UK
• PMA/510(K) Number: K760093
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Other,Study
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 05/31/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Lay User/Patient
• Device Model Number: 166816
• Device Catalogue Number: 166816
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 03/07/2022
• Supplement Date Received by Manufacturer: 06/01/2022
• Initial Report FDA Received Date: 03/31/2022
• Supplement Report FDA Received Date: 06/21/2022
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Other
• Patient Sex: Unknown