MAUDE Adverse Event Report: SYNTHES GMBH COLIBRI II HANDPIECE; INSTRUMENT, SURGICAL, ORTHOPEDIC, AC-POWERED, MOTOR/ACCESS AND ATTACHMENT

Catalog Number 532.101

Device Problems Noise, Audible (3273); Excessive Heating (4030)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/27/2022

Event Type  malfunction  

Event Description

It was reported from (b)(6) that the colibri handpiece device generated heat and had abnormal noise.It was further reported that the device was being used with two casing devices and two battery devices.It was not reported if the device was used in surgery, or if there was patient involvement.It was not reported if there were any delays in a surgical procedure, or if a spare device was available for use.It was not reported if there were any injuries, medical intervention or prolonged hospitalization.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.

Manufacturer Narrative

Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.The actual device has been returned and is currently pending evaluation.Once the evaluation has been completed, a supplemental medwatch report will be sent accordingly.Udi:(b)(4).

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: the actual device was returned for evaluation.During repair, an evaluation was performed and it was determined that the device had vibration, unexpected noise, sticky trigger and failed pre-test for sticky trigger.Therefore, the reported condition was confirmed.The assignable root cause was determined to be due to component wear.

• Brand Name: COLIBRI II HANDPIECE
• Type of Device: INSTRUMENT, SURGICAL, ORTHOPEDIC, AC-POWERED, MOTOR/ACCESS AND ATTACHMENT
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer Contact: kate karberg ; eimattstrasse 3; oberdorf 4436 ; SZ 4436 ; 3035526892
• MDR Report Key: 13977001
• MDR Text Key: 288868277
• Report Number: 8030965-2022-02105
• Device Sequence Number: 1
• Product Code: HWE
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,User Facility,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date: 04/01/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 04/01/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 532.101
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/28/2022
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 06/26/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 09/12/2018
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Removal/Correction Number: N/A
• Patient Sequence Number: 1