MAUDE Adverse Event Report: MEDTRONIC PUERTO RICO OPERATIONS CO. SYNCHROMED II; PUMP, INFUSION, IMPLANTED, PROGRAMMABLE

Model Number 8637-20

Device Problem Electromagnetic Interference (1194)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 05/16/2022

Event Type  malfunction  

Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

Event Description

Information was received from a healthcare provider (hcp) via a company representative regarding a patient receiving dilaudid via an implanted pump.The indication for pump use was non-malignant pain.It was reported that the patient¿s pump had not been read since an mri yesterday and upon reading it today about 5 minutes ago it was still showing a motor stall.No alarm was reported.Telemetry mode was reviewed during the call.

Event Description

Additional information received from the company representative reported that a motor stall recovery message was seen in the pump logs after re-interrogation of the pump.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Additional information received from a healthcare provider (hcp) via a manufacturer representative (rep) indicated that the patient had magnetic resonance imaging (mri) on (b)(6)2022 and a motor stall occurred.The pump did not recover.The pump was "looked at" on (b)(6)2022 and the motor stall "recovered itself".The pump was close to reaching the elective replacement indicator (eri), so it was replaced on (b)(6)2022-.It was unknown if any environmental, external, or patient factors may have led or contributed to the issue.At the time of the report, the issue was resolved and the patient status was "alive-no injury".The pump was used to deliver dilaudid (hydromorphone) at a concentration of "400mcg" and dose of "90mcg".The patient's weight and medical history were asked but would not be made available.

Event Description

Additional information received from a company representative (rep) reported the motor stall occurred after the reported mri and refill and showed that it recovered itself when checked on (b)(6) 2022.The pump was reported to be replaced due to nearing early replacement indicator.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3: analysis of the pump revealed pump miscellaneous failed lab dispense test; above spec.H10: interrogation of the pump upon receipt indicated the pump was used to deliver dilaudid 400.0 mcg/ml at 19.21 mcg/day medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: SYNCHROMED II
• Type of Device: PUMP, INFUSION, IMPLANTED, PROGRAMMABLE
• Manufacturer (Section D): MEDTRONIC PUERTO RICO OPERATIONS CO.; road 31, km. 24, hm 4; ceiba norte industrial park; juncos PR 00777
• Manufacturer (Section G): MEDTRONIC PUERTO RICO OPERATIONS CO.; road 31, km. 24, hm 4; ceiba norte industrial park; juncos PR 00777
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 14469292
• MDR Text Key: 292373295
• Report Number: 3004209178-2022-06587
• Device Sequence Number: 1
• Product Code: LKK
• UDI-Device Identifier: 00643169508149
• UDI-Public: 00643169508149
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P860004
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup,Followup
• Report Date: 03/07/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 05/23/2022
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 03/28/2018
• Device Model Number: 8637-20
• Device Catalogue Number: 8637-20
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 03/03/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 10/03/2016
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Age: 85 YR
• Patient Sex: Male