MAUDE Adverse Event Report: MEDOS INTERNATIONAL SÃ RL CH MIS TI CFX FEN POLY 10X45; BONE CEMENT, POSTERIOR SCREW AUGMENTATION

Model Number	186727045
Medical Device Problem Code	Detachment of Device or Device Component (2907)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	05/20/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.This report is for an unknown screw/rod construct accessories: viper 2/unknown lot.Part and lot number are unknown.Without the specific part number; the udi number and 510-k number is unknown.Complainant part is not expected to be returned for manufacturer review/investigation.Reporter is a j&j employee.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Device report from synthes reports an event in germany as follows: it was reported that on (b)(6) 2022, the viper ii cfx screw failed and when tightening the polyaxial head came off the shaft.There was a surgical delay of twenty minutes.There were no fragments generated.This report involves one unknown screw/rod construct accessories: viper 2.This is report 1 of 2 for (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d2: additional procode: mni.D10: date of concomitant therapy is may 20, 2022.H3, h4, h6: a manufacturing record evaluation was performed for the finished device product code: 186727045s.Lot number: 318061.It was electronically reviewed and no non-conformances / manufacturing irregularities were identified during the manufacturing process.The product was released on: september 16, 2021.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the mis ti cfx fen poly 10x45 was found the flex ball broken.No other defect was found.The broken fragment was returned.A dimensional inspection for the mis ti cfx fen poly 10x45 was unable to be performed due to post manufacturing damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the mis ti cfx fen poly 10x45 would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Drawing/specifications reviewed the drawings reflecting the current and manufactured revisions were reviewed.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: MIS TI CFX FEN POLY 10X45
• Common Device Name: BONE CEMENT, POSTERIOR SCREW AUGMENTATION
• Manufacturer (Section D): MEDOS INTERNATIONAL SÃ RL CH; chemin-blanc 38; le locle 02400 ; SZ 02400
• Manufacturer (Section G): MEDOS INT SPINE; chemin blanc 38; le locle ; SZ
• Manufacturer Contact: kate karberg ; chemin-blanc 38; le locle 02400 ; SZ 02400 ; 3035526892
• MDR Report Key: 14733024
• Report Number: 1526439-2022-00882
• Device Sequence Number: 16707536
• Product Code: PML
• UDI-Device Identifier: 10705034282343
• UDI-Public: (01)10705034282343
• Combination Product (Y/N): N
• Initial Reporter Country: GM
• PMA/510(K) Number: K160879
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• 2 Devices were Involved in the Event: 1 2

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 186727045
• Device Catalogue Number: 186727045
• Device Lot Number: 318061
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 05/20/2022
• Supplement Date Received by Manufacturer: 08/08/2022
• Initial Report FDA Received Date: 06/17/2022
• Supplement Report FDA Received Date: 08/16/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 09/16/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: UNK - SCREW/ROD CONSTRUCT ACCESSORIES: VIPER 2
• Patient Age: 59 YR
• Patient Sex: Male