MAUDE Adverse Event Report: ZIMMER BIOMET, INC. TPRLC 133 MP TYPE1 PPS SO 11.0; PROSTHESIS, HIP

Model Number	N/A
Medical Device Problem Code	Difficult to Insert (1316)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	05/27/2022
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that during an initial hip arthroplasty, the stem would not seat into the femur after several broaching attempts.No adverse events have been reported as a result of the malfunction.Additional information on the reported event is unavailable.
Additional Manufacturer Narrative
(b)(4).Customer has indicated that the product will not be returned to zimmer biomet for investigation.The investigation is in process.Once the investigation has been completed, a follow-up mdr will be submitted.
Event or Problem Description
No further event information available at the time of this report.
Additional Manufacturer Narrative
This follow-up report is being submitted to relay additional information.The following sections were updated: b4, b5, g3, h1, h2, h3, h6, h10 visual examination of the returned product identified scratching on either side of the neck of the stem.No other damage was observed.The remainder of the stem is in good overall condition.Additionally dimensional analysis was preformed.The width and the overall length were measured.The measurements fall within the appropriate range for the stem.Reported event was unable to be confirmed.Review of the device history record(s) identified no deviations or anomalies during manufacturing related to the reported event.Root cause could not be determined if any further information is found which would change or alter any conclusions or information, a supplemental will be filed accordingly.Zimmer biomet will continue to monitor for trends.

• Brand Name: TPRLC 133 MP TYPE1 PPS SO 11.0
• Common Device Name: PROSTHESIS, HIP
• Manufacturer (Section D): ZIMMER BIOMET, INC.; 56 e. bell drive; p.o. box 587; warsaw IN 46581
• Manufacturer (Section G): ZIMMER BIOMET, INC.; 56 e. bell drive; p.o. box 587; warsaw IN 46581
• Manufacturer Contact: jennifer rapsavage ; 56 e. bell dr.; warsaw, IN 46582 ; 5745260384
• MDR Report Key: 14734286
• Report Number: 0001825034-2022-01400
• Device Sequence Number: 12158381
• Product Code: JDI
• UDI-Device Identifier: 00880304514294
• UDI-Public: (01)00880304514294(17)310402(10)6992164
• Combination Product (Y/N): N
• Initial Reporter State: FL
• Initial Reporter Country: US
• PMA/510(K) Number: K120030
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,Company Representative
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date (Section B): 08/05/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: N/A
• Device Catalogue Number: 51-106110
• Device Lot Number: 6992164
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 05/27/2022
• Supplement Date Received by Manufacturer: 08/02/2022
• Initial Report FDA Received Date: 06/17/2022
• Supplement Report FDA Received Date: 08/09/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 04/02/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• If action reported to FDA under 21 USC 360i(g), list FDA-assigned Recall Number or include a statement: N/A
• Patient Sequence Number: 1
• Patient Sex: Unknown