STRYKER NEUROVASCULAR CORK TARGET 360 SOFT 3MM X 8CM; DEVICE, NEUROVASCULAR EMBOLIZATION
|
Back to Search Results |
|
Model Number M0035473080 |
Device Problems
Fracture (1260); Expulsion (2933)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 06/08/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
The device is not available to the manufacturer.
|
|
Event Description
|
It was reported that during procedure, when third of the coil (subject device) was inserted into aneurysm, the operator found no reaction from the manipulation.When checked under dsa, it was found that the coil (subject device) was fractured.The operator tried to push and pull the coil (subject device) several times, it could not move.So the operator retraced rest of the coil (subject device) with delivery wire out, and used a guidewire to push part of the coil (subject device) which was out of the aneurysm to go into aneurysm slowly.The procedure was completed successfully.No clinical consequences were reported to the patient due to this event.
|
|
Manufacturer Narrative
|
H4 manufacturing date ¿ added h3 device evaluated by mfg ¿updated h3 summary attached - updated d4 expiration date - added d9 product available to stryker ¿ updated d9 returned to manufacturer on ¿updated due to the automated mes (manufacturing execution system) system, there are controls in the manufacturing process to ensure the product met specifications upon release.During visual inspection, the coil delivery wire was found to be severely kinked/bent and the main coil was found to be intact.A functional test was not performed.The reported event is covered in the device directions for use (dfu).As well, the risk of the reported event is documented in the risk documentation and there are current controls to mitigate the risk of the as reported event.The reported main coil broken/fractured during use was not confirmed during the analysis.The reported main coil protrusion could not be confirmed during the analysis as the event is procedure/patient related.The device failed to meet specifications when received for complaint investigation based on the analyzed anomalies noted to the device.The device was analyzed.The main coil was found to be intact.No breakage/fracture was noted.An assignable cause of 'not confirmed' will be assigned to the as reported 'main coil broken/fractured during use' as the defect was not confirmed during the analysis.An assignable cause of undeterminable will be assigned to the reported 'main coil protrusion', as there are a number of potential causes for the reported issue, because review and analysis of available information failed to identify a definitive cause.An assignable cause of handling damage will be assigned to the 'coil delivery wire kinked/bent' since it is most likely that this damage occurred due to handling of delivery wire during the clinical procedure.
|
|
Event Description
|
It was reported that during procedure, when third of the coil (subject device) was inserted into aneurysm, the operator found no reaction from the manipulation.When checked under dsa, it was found that the coil (subject device) was fractured.The operator tried to push and pull the coil (subject device) several times, it could not move.So the operator retraced rest of the coil (subject device) with delivery wire out, and used a guidewire to push part of the coil (subject device) which was out of the aneurysm to go into aneurysm slowly.The procedure was completed successfully.No clinical consequences were reported to the patient due to this event.
|
|
Search Alerts/Recalls
|
|
|