MAUDE Adverse Event Report: MEDOS INTERNATIONAL SARL TRUESPAN MENISCAL REPAIR SYSTEM PLGA 0 DEGREE; SOFT-TISSUE ANCHOR, BIOABSORBABLE

Model Number	228160
Medical Device Problem Code	Device-Device Incompatibility (2919)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	06/16/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Udi: (b)(4).The expiration date is currently unavailable.Reporter is a j&j sales representative.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.
Event or Problem Description
This is report 2 of 2 for (b)(4).It was reported by the sales rep in switzerland that during a meniscal repair procedure on (b)(6) 2022, it was observed that two truespan meniscal repair system plga 0 degree devices did not function properly as they did not fire the implants.There were no adverse patient consequences nor surgical delay reported.No additional information was provided.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: d4, h4: the expiration date and device manufacture date were reported as unknown on the initial report; and have been updated accordingly.Investigation summary: the device was received and evaluated.When performing the visual inspection, the covering sleeve was removed to verify the presence of the plates, however, they were not returned.The applier needle has no structural anomalies that can interfere with a good deployment.The trigger was tested several times, it performed as intended, the spring pusher has no structural anomalies.A manufacturing record evaluation was performed for the finished device 5l82000 number, and no non-conformances were identified.As part of depuy synthes mitek quality process all devices are manufactured, inspected, and released to approved specifications.According with the visual inspection and the functional test results, this complaint cannot be confirmed.Since the device passed all visual and functional tests, and considering that both plates were not returned, we can conclude that the device has no issue.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to monitor additional complaint information for potential safety signals through complaint trending as part of post market surveillance.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.D9, h3, h6: the actual device has been returned and is currently pending evaluation.Once reliability engineering evaluates the device, a supplemental medwatch report will be sent accordingly.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: TRUESPAN MENISCAL REPAIR SYSTEM PLGA 0 DEGREE
• Common Device Name: SOFT-TISSUE ANCHOR, BIOABSORBABLE
• Manufacturer (Section D): MEDOS INTERNATIONAL SARL; chemin blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer (Section G): MEDOS INTERNATIONAL SARL; chemin-blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 14878495
• Report Number: 1221934-2022-01979
• Device Sequence Number: 4996620
• Product Code: MBI
• UDI-Device Identifier: 10886705026036
• UDI-Public: 10886705026036
• Combination Product (Y/N): N
• Initial Reporter Country: SZ
• PMA/510(K) Number: K153667
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,User Facility,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 07/31/2022
• Device Model Number: 228160
• Device Catalogue Number: 228160
• Device Lot Number: 5L82000
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 06/17/2022
• Supplement Date Received by Manufacturer: 07/22/2022; 08/08/2022
• Initial Report FDA Received Date: 06/30/2022
• Supplement Report FDA Received Date: 07/25/2022; 08/09/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 08/23/2019
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown