MAUDE Adverse Event Report: WRIGHTS LANE SYNTHES USA PRODUCTS LLC 10.0MM MEDULLARY REAMER HEAD

Model Number	352.100
Medical Device Problem Code	Failure to Cut (2587)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	06/20/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint #: (b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Additional narrative: initial reporter occupation: reporter is a j&j employee.Device available for evaluation: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.Concomitant medical products: date of concomitant therapy is on (b)(6) 2022.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported on (b)(6) 2022, the reamer heads were dull.They do not cut through bone efficiently anymore.Surgery was delayed 5 minutes due to the reported event.There was no patient consequence reported.The procedure was successfully completed.This report is for one 10.0mm medullary reamer head this is report 16 of 20 for complaint (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d4: lot #.A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.Part: 352.100 lot no : 25181 release to warehouse date: 25 jan 2011 manufacturing site: werk selzach supplier: p.Rieger the product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that cutting surface of the 10.0mm medullary reamer head has dull, blunting of cutting edges due to multiple uses.The observed condition was consistent as an end of life indicator for the device.No other issues where identified.No other issues were observed.After a visual inspection per procedure, it was determined that the reusable instrument device was worn from repeated use and servicing; therefore, further investigation for the reported complaint device is not required.A functional test to assess the will not cut / dull condition can not be conducted since the allegation is related to bone.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed blunting of cutting edges of 10.0mm medullary reamer head would have contributed to the complained issue.There is no indication that a design or manufacturing issue has caused the complaint condition.It was determined that the reusable instrument was worn from repeated use and servicing.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.If information is obtained that was not available for this medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: 10.0MM MEDULLARY REAMER HEAD
• Common Device Name: REAMER
• Manufacturer (Section D): WRIGHTS LANE SYNTHES USA PRODUCTS LLC; 1302 wrights lane east; west chester PA 19380
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 15075189
• Report Number: 2939274-2022-02791
• Device Sequence Number: 5489591
• Product Code: HTO
• UDI-Device Identifier: 10886982194206
• UDI-Public: (01)10886982194206
• Combination Product (Y/N): N
• Initial Reporter Country: CA
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 07/21/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 352.100
• Device Catalogue Number: 352.100
• Device Lot Number: 25181
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 06/21/2022
• Supplement Date Received by Manufacturer: 10/13/2022
• Initial Report FDA Received Date: 07/21/2022
• Supplement Report FDA Received Date: 11/03/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 05/11/2011
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: 10.0MM MEDULLARY REAMER HEAD; 10.0MM MEDULLARY REAMER HEAD; 10.5MM MEDULLARY REAMER HEAD; 11.0MM MEDULLARY REAMER HEAD; 11.0MM MEDULLARY REAMER HEAD; 11.5MM MEDULLARY REAMER HEAD; 11.5MM MEDULLARY REAMER HEAD; 12.0MM MEDULLARY REAMER HEAD; 12.0MM MEDULLARY REAMER HEAD FRONT CUTTING; 12.5MM MEDULLARY REAMER HEAD; 12.5MM MEDULLARY REAMER HEAD; 13.0MM MEDULLARY REAMER HEAD; 13.0MM MEDULLARY REAMER HEAD; 8.5MM MEDULLARY REAMER HEAD; 8.5MM MEDULLARY REAMER HEAD; 9.0MM MEDULLARY REAMER HEAD; 9.0MM MEDULLARY REAMER HEAD; 9.5MM MEDULLARY REAMER HEAD; 9.5MM MEDULLARY REAMER HEAD
• Patient Sex: Unknown