Model Number 392523 |
Device Problem
Leak/Splash (1354)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 07/26/2022 |
Event Type
malfunction
|
Event Description
|
It was reported that the bd insyte¿ autoguard¿ bc pro shielded iv catheter leaked fluid at the hub connection during the infusion.The following information was provided by the initial reporter: "on 7/26 a 22g 1 inch bd instyle autogaurd bc pro was placed on our patient in the left forearm.Iv inserted, flash noted and catheter threaded without complication, needle retracted with safety button.Some blood noted at insertion site but did not return after cleaned up.Iv flushed without complication no leaking noted at this point.Secured with tagederm and tape.Fluids running slow tko.After about 10 minutes patient called staff in and leaking noted when we attempted to see if hub needed to be secured that is when it was noticed fluid was leaking was where hub meets catheter.Fluids stopped immediately and concern was that catheter would dislodge from hub, we slowly removed iv catheter without any issue.
|
|
Manufacturer Narrative
|
A device evaluation is anticipated but has not yet begun.Upon completion of the investigation, a supplemental report will be filed.
|
|
Manufacturer Narrative
|
The following fields were updated due to additional information: d.9.Device available for eval: yes.D.9.Returned to manufacturer on: 03-aug-2022.H.6.Investigation summary: our quality engineer inspected the sample submitted for evaluation.Bd received one used 22g x 1.00in.Insyte autoguard bc pro unit from lot number 1328318.Through the initial inspection, damage was not observed with any of the components.The unit was leak tested where a leak was identified just above the nose of the adapter.Further microscopic inspection found that an angled tear was present in the shape of two arches connecting.The reported issue was confirmed.Based on the location of the damage and the observed characteristics, it is likely that the reported defect originated in manufacturing during swaging of the unit.During the swaging process the tubing is placed over a pin and may get pinched or nicked.Operators perform a leak test of the final assembly per the sampling and quality plans to mitigate the occurrence of this defect.A device history record review showed no non-conformances associated with this issue during the production of this batch.Complaints received for this device and reported condition will continue to be tracked and trended.Information will be captured on trend reports and monitored.Our business team regularly reviews the collected data for identification of emerging trends.
|
|
Event Description
|
It was reported that the bd insyte¿ autoguard¿ bc pro shielded iv catheter leaked fluid at the hub connection during the infusion.The following information was provided by the initial reporter: "on 7/26 a 22g 1 inch bd instyle autogaurd bc pro was placed on our patient in the left forearm.Iv inserted, flash noted and catheter threaded without complication, needle retracted with safety button.Some blood noted at insertion site but did not return after cleaned up.Iv flushed without complication no leaking noted at this point.Secured with tagederm and tape.Fluids running slow tko.After about 10 minutes patient called staff in and leaking noted when we attempted to see if hub needed to be secured that is when it was noticed fluid was leaking was where hub meets catheter.Fluids stopped immediately and concern was that catheter would dislodge from hub, we slowly removed iv catheter without any issue.
|
|
Search Alerts/Recalls
|