MAUDE Adverse Event Report: W. L. GORE & ASSOCIATES, INC. GORE® DUALMESH® PLUS BIOMATERIAL; MESH, SURGICAL, POLYMERIC

Catalog Number 1DLMCPO8

Device Problems Therapeutic or Diagnostic Output Failure (3023); Insufficient Information (3190)

Patient Problems Adhesion(s) (1695); Inflammation (1932); Pain (1994); Seroma (2069)

Event Date 08/08/2016

Event Type  Injury  

Event Description

It was reported to gore that the patient underwent laparoscopic ventral hernia repair on (b)(6) 2005 whereby a gore® dualmesh® plus biomaterial was implanted.The complaint alleges that on (b)(6) 2016 and (b)(6) 2020, additional procedures occurred whereby the gore device was explanted.It was reported the patient alleges the following injuries: additional surgery; recurrence; seroma; wound vac; adhesions; mesh removal; inflammation; abdominal wall reconstruction; pain & suffering.Additional event specific information was not provided.

Manufacturer Narrative

H6 added evaluation codes; codes b21/c20 - product identification records for the alleged gore device were not provided.Therefore, a review of the manufacturing records could not be performed.W.L.Gore & associates, inc.(gore) is submitting this report to comply with 21 c.F.R.Part 803, the medical device reporting regulation.This report is based upon information obtained by gore, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Blank fields present on this report include required fields and fields determined to be not applicable.Blank required fields indicate that the information was not provided, was deemed unavailable or was not applicable.This report does not constitute an admission or a conclusion by fda, gore, or its associates that the device, gore or its associates caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any "defects" or has "malfunctioned".These words are included in the report and are fixed items for selection created by the fda, to categorize the type of event solely for the purpose of reporting pursuant to part 803.This statement should be included with any information or report disclosed to the public under the freedom of information act.

Manufacturer Narrative

H6: updated health effect.H6: updated investigation finding.H6: updated investigation conclusions.The investigation has been completed.Based upon the totality of the information received over the course of the investigation and reported by gore in the previously submitted medical record narratives the following conclusions have been reached.As previously reported, all pertinent medical records requested may not have been received.In the absence of additional information or medical records from the complainant, this event file will be closed with the information provided.It should be noted that the gore® dualmesh® plus biomaterial instructions for use include warnings and addresses the following adverse reactions among others: ¿possible adverse reactions with the use of any tissue deficiency prosthesis may include, but are not limited to, contamination, infection, inflammation, adhesion, fistula formation, seroma formation, hematoma, and recurrence.¿ as with any surgical procedure, there are always risks of complications for surgical repair of hernias and soft tissue deficiencies, with or without mesh.These may include but are not limited to, adhesions and related harms, bleeding, bowel obstruction, compromised device biocompatibility, contamination which may lead to patient harms, device damage, dysphagia, erosion or extrusion and related harms, exposure or protrusion and related harms, fever, fistula, gerd recurrence, defect recurrence and related harms, ileus, increased procedure time and related harms, irritation or inflammation, infection, mesh migration, mesh contraction, pain, paresthesia, perforation, revision/re-intervention, seroma or hematoma and related harms, tissue ischemia, wound complications and wound dehiscence and additional intervention including surgery.Many of the potential complications are associated with the patient¿s underlying disease progression, co-morbidities, additional medical history and/or other surgical procedures.The above inherent risks are typically detailed in standard informed consent documents.The device was not able to be returned to gore for evaluation; therefore, a direct product analysis could not be conducted.After multiple requests, specific lot number information was not provided for this device, but product type has been confirmed.Review of the manufacturing and sterilization records could not be performed as a valid lot number was not provided.C1: the plus antimicrobial product coating contains silver carbonate [approximately 800 micrograms per cubic centimeter of product (g/cm3)], and chlorhexidine diacetate [approximately 1600 micrograms per cubic centimeter of product (g/cm3)].W.L.Gore & associates, inc.(gore) is submitting this report to comply with 21 c.F.R.Part 803, the medical device reporting regulation.This report is based upon information obtained by gore, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Blank fields present on this report include required fields and fields determined to be not applicable.Blank required fields indicate that the information was not provided, was deemed unavailable or was not applicable.This report does not constitute an admission or a conclusion by fda, gore, or its associates that the device, gore or its associates caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any "defects" or has "malfunctioned".These words are included in the report and are fixed items for selection created by the fda, to categorize the type of event solely for the purpose of reporting pursuant to part 803.This statement should be included with any information or report disclosed to the public under the freedom of information act.

• Brand Name: GORE® DUALMESH® PLUS BIOMATERIAL
• Type of Device: MESH, SURGICAL, POLYMERIC
• Manufacturer (Section D): W. L. GORE & ASSOCIATES, INC.; 1505 n. fourth street; flagstaff AZ 86004
• Manufacturer (Section G): MEDICAL WOODY MOUNTAIN B/P; 3750 w. kiltie lane; flagstaff AZ 86005
• Manufacturer Contact: jorja nackard ; 1505 n. fourth street; flagstaff, AZ 86004 ; 9285263030
• MDR Report Key: 15242097
• MDR Text Key: 298070992
• Report Number: 2017233-2022-03224
• Device Sequence Number: 1
• Product Code: FTL
• Combination Product (y/n): Y
• Reporter Country Code: US
• PMA/PMN Number: K063435
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Other
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 05/02/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 08/17/2022
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Catalogue Number: 1DLMCPO8
• Was Device Available for Evaluation?: No
• Date Manufacturer Received: 08/09/2022
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention; Hospitalization
• Patient Age: 67 YR
• Patient Weight: 86 KG