MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 ALYTE Y-MESH GRAFT

Model Number	Y100
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Codes	Pain (1994); Discomfort (2330)
Type of Reportable Event	Serious Injury
Event or Problem Description
The patient's attorney alleged a deficiency against the device.Additional information has been requested, but not yet received.
Additional Manufacturer Narrative
The reported event could not be confirmed.No sample was returned for evaluation and the lot number is unknown.Based on the investigation findings, current manufacturing controls are considered adequate as to detect and segregate any non-conforming unit.Event described could not be confirmed as a manufacturing related issue.The alleged event is most likely associated with possible procedural/surgical complications.The ifu currently addresses potential risks associated with surgically implantable materials.Precautions: based on physician experience and training, a thorough assessment of each patient should be made to determine their suitability for a synthetic mesh procedure.Additional consideration should be given to the use of alyte® y-mesh graft in patients with a compromised immune system, any condition that would compromise healing, or any patient with a history of prior abdominal or pelvic surgeries.Consideration should also be given to the ability of the patient to tolerate the surgical procedure.Accepted surgical practice and precautions must be followed for the management of infected or contaminated wounds.Postoperative bleeding may occur in some patients and must be controlled prior to patient release.Sutures should not be placed in the mesh edge.Sutures should be placed a minimum of 1cm from any mesh edge.Inadequate suturing of the graft material to the pelvic tissues may lead to failure of the repair, additional complications and recurrence of prolapse.Check the integrity of the packaging before use.Do not use the mesh if the packaging is opened or damaged.As for any implantable material, it is recommended to open the package at the time of implantation.The alyte® y-mesh graft is intended as a single-use device.Do not re-sterilize any portion of the alyte® y-mesh graft.Reuse and/or repackaging may create a risk of patient or user infection, compromise the structural integrity and/or essential material and design characteristics of the device, which may lead to device failure, and/or lead to injury, illness or death of the patient.Post-operatively the patient should be advised to refrain from heavy lifting, exercise (e.G.Cycling, jogging) and/or intercourse until the physician determines it is suitable for the patient to return to normal activities.Adverse events: complications associated with the proper implantation of the alyte® y-mesh graft may include, but are not limited to those typically associated with surgically implantable materials including: postoperative hematoma, seroma, abscess or fistula formation, or scarring which may occur following the implant procedure.Urinary retention, bladder outlet obstruction and other voiding and defecatory dysfunctions.These conditions may be associated with over-correction/too much tension placed on the implant.Perforations or lacerations of vessels, nerves, bladder, bowel, urethra, rectum, or any viscera, which may occur during the implantation procedure.Irritation at the operative wound site which may elicit a foreign body response that leads to wound dehiscence, inflammation and/or infection.Extrusion through vaginal epithelium or erosion into surrounding viscera and/or mucosa.Inflammation, sensitization, pain, dyspareunia, scarification, contraction, device migration and failure of the procedure resulting in recurrence of vaginal wall prolapse.Urinary incontinence (stress and urge).1994 = "l" 2348, 2330 = "nl".

• Brand Name: ALYTE Y-MESH GRAFT
• Common Device Name: ALYTE Y-MESH GRAFT
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• Manufacturer (Section G): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• Manufacturer Contact: juan velez ; 8195 industrial blvd; covington, GA 30014 ; 7707846100
• MDR Report Key: 15292913
• Report Number: 1018233-2022-90026
• Device Sequence Number: 7091987
• Product Code: OTO
• UDI-Device Identifier: 00801741016158
• UDI-Public: (01)00801741016158
• Combination Product (Y/N): N
• Initial Reporter State: NJ
• Initial Reporter Country: US
• PMA/510(K) Number: K101722
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2012
• Reporter Type: Manufacturer
• Report Source: Other
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial
• Report Date (Section B): 08/25/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Model Number: Y100
• Device Catalogue Number: Y100
• Was Device Available for Evaluation?: No
• Event Location: Hospital
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 08/16/2022
• Initial Report FDA Received Date: 08/25/2022
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Sex: Female