MAUDE Adverse Event Report: US SURGICAL PUERTO RICO ENDO GRASP; MOTOR, SURGICAL INSTRUMENT, PNEUMATIC POWERED

Model Number	174233
Medical Device Problem Code	Material Split, Cut or Torn (4008)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	09/05/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
Event or Problem Description
According to the reporter, during the laparoscopic cholecystectomy, at the beginning of the surgery, the relevant forceps from the port were inserted into the patient's abdominal cavity, but it was before grasping the tissue, the dial was turned and the articulation angle was set to 0°.The surgeon inserted the forceps from the port and turned the dial to set the articulation angle to 80°, then the surgeon found something like vinyl coming out.A new device was used to resolve the issue.There was no patient injury.
Additional Manufacturer Narrative
Medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted the sheath of the instrument was damaged.It was reported that the plastic coating on the shaft of the device was ripped, torn, or the two ends of the reload of the endo catch ring connected by plastic shrink wrap was damaged.The reported issue was confirmed.The product analysis noted evidence that the device was not used as intended.This issue can occur if excessive manipulation is applied to jaws or device when articulating.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.The instructions included with this device provide the following guidance: endoscopic procedures should be performed only by physicians having adequate training and familiarity with endoscopic techniques.Consult the medical literature relative to complications, hazards and techniques, prior to performing endoscopic procedures.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.

• Brand Name: ENDO GRASP
• Common Device Name: MOTOR, SURGICAL INSTRUMENT, PNEUMATIC POWERED
• Manufacturer (Section D): US SURGICAL PUERTO RICO; 201 sabanetas industrial park; ponce PR 00716 4401
• Manufacturer (Section G): US SURGICAL PUERTO RICO; 201 sabanetas industrial park; ponce PR 00716 4401
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 15457356
• Report Number: 2647580-2022-03338
• Device Sequence Number: 17832092
• Product Code: GET
• UDI-Device Identifier: 10884523000818
• UDI-Public: 10884523000818
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: K914753
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 10/03/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 174233
• Device Catalogue Number: 174233
• Device Lot Number: P1L1004
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 09/12/2022
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 09/05/2022
• Supplement Date Received by Manufacturer: 09/21/2022
• Initial Report FDA Received Date: 09/20/2022
• Supplement Report FDA Received Date: 10/03/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 11/19/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown