MAUDE Adverse Event Report: SYNTHES GMBH SLIP SLEEVE FOR THREADED HOLDING SLEEVE; ORTHOPEDIC MANUAL SURGICAL INSTRUMENT

Model Number	03.614.036
Medical Device Problem Code	Compatibility Problem (2960)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	09/02/2022
Type of Reportable Event	Malfunction
Event or Problem Description
Device report from japan reports an event as follows: it was reported that on (b)(6) 2022, during o-t fusion (cervical spine) for cervical myelopathy, the screw in question could not be attached to the two screwdrivers in question.The operation was completed successfully using another synapse screwdriver.There was a delay of approximately 30 minutes.This report is for a slip sleeve for threaded holding sleeve.This is report 6 of 7 for (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device available for evaluation: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.The initial reporter is a synthes employee.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.Part:03.614.036, lot: 9717124, manufacturing site: werk hagendorf, supplier: na, release to warehouse date:07 dec 2015, expiration date: na.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that there was no damage or defects on the surface of outersleeve f/holding sleeve no.03.614., p/n: 03.614.036.A dimensional inspection was unable to be performed due to not being relevant to the complaint condition.A functional test was performed.The outer sleeve was assembled to the returned hexagonal screwdriver shaft cross pinned, p/n: 03.614.039, and the returned hold-sl, p/n: 03.614.017.After that, the returned cancellousscr synapse ø4 l26 f/r ø4 tan, p/n: 04.615.126s, was threaded to the assembly.The screw was successfully assembled.The complaint condition was not replicated.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was not confirmed as the observed condition of the outersleeve f/holding sleeve no.03.614., p/n: 03.614.036 would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.If information is obtained that was not available for this medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: SLIP SLEEVE FOR THREADED HOLDING SLEEVE
• Common Device Name: ORTHOPEDIC MANUAL SURGICAL INSTRUMENT
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 15463425
• Report Number: 8030965-2022-07204
• Device Sequence Number: 12476461
• Product Code: LXH
• UDI-Device Identifier: 10705034715049
• UDI-Public: (01)10705034715049
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 03.614.036
• Device Catalogue Number: 03.614.036
• Device Lot Number: 9717124
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 09/02/2022
• Supplement Date Received by Manufacturer: 10/05/2022
• Initial Report FDA Received Date: 09/22/2022
• Supplement Report FDA Received Date: 10/28/2022
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 12/07/2015
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: CANCELLOUSSCR SYNAPSE Ø4 L26 F/R Ø4 TAN; HEXAGONAL SCREWDRIVER SHAFT CROSS PINNED; HEXAGONAL SCREWDRIVER SHAFT CROSS PINNED; HOLD-SL; HOLD-SL; OUTERSLEEVE F/HOLDING SLEEVE NO. 03.614.
• Patient Sex: Unknown