| Model Number |
164020 |
| Medical Device Problem Codes |
Corroded (1131); Contamination of Device Ingredient or Reagent (2901)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
09/07/2022
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
As part of normal complaint follow-up, an evaluation of the event has been initiated by mako surgical. a supplemental report will be submitted when additional information becomes available.
|
| |
|
Event or Problem Description
|
|
Rust found in both registration tools contaminating a whole back table setup.Case type / application: tka.
|
| |
|
Event or Problem Description
|
|
Rust found in both registration tools contaminating a whole back table setup.Case type / application: tka.
|
| |
|
Additional Manufacturer Narrative
|
|
Reported event.An event regarding corrosion involving a mako mics was reported.The event was not confirmed because the product was not available for inspection.Method & results.Product evaluation and results: material analysis, visual, functional and dimensional inspections could not be performed as the device was not returned.Clinician review: no medical records were received for review with a clinical consultant.Product history review: a product history review is not required, as no manufacturing specific issue has been alleged.At stryker joint replacement all devices/product are manufactured through validated equipment and inspected by trained representatives through stryker¿s quality management system.Complaint history review: a complaint history review and trend detection is not required as this is a pm.Monitoring will be continued under the current quarterly trend review.Conclusions: per preventive maintenance is where an action occurs that identifies device deterioration which may compromise function.Under pm conditions no patient was involved and no actual or potential patient harm existed for the alleged event.The alleged failure mode was not confirmed because the product was not available for inspection.No additional investigation or specific actions are required.If additional information is received then the complaint will be reopened.
|
| |
|
Search Alerts/Recalls
|