|
(b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.(b)(4).Investigation summary: the product was returned for evaluation.Visual inspection evaluation was conducted on the returned device.Visual analysis of the returned sample revealed that one opened box with thirty-two packets inside that pertains to product code (b)(4) were returned for analysis.During the visual inspection of the box and the samples, the needle sales type printing in the packages belongs to ct-1 needles.The needles that belong to the mh sales type were not received for evaluation.In addition, the two sale types were reviewed in the system and the needle characteristic for ct-1 and mh should be the same.Mh is manufactured in ethicon puerto rico and the ct-1 is manufactured in ethicon juarez.Both needles are included in the product description.Curvature 1/2 circle, taper point, wire diameter 40 mils.The manufacturing records were reviewed, and the manufacturing/packaging criteria were met prior to the release of this batch.According to the samples, the printing information on the foils related to needle sales type is correct.Additional information was requested and the following was obtained: in the event description it mentions: "the box contained a ct-1 needle but should have been a mh needle" but in the impacted product (b)(4).The quantity of product involved there are 36 each and the quantity to be returned is 1 each.What is the quantity involved of mixed needles for this single procedure? typically we use 3-4 per procedure.Please provide the specific number of patient events: did the event occur during one or multiple patient procedures? yes has been used and is continuing to be used until replacements can be delivered.Have any of these events been previously reported to ethicon? if so, provide the respective reference number(s).No.If this event occurred in multiple procedures, please provide information requested above for each patient event: have any of these events been previously reported to ethicon? if so, provide the respective reference number(s).No.What is the quantity involved per procedure? 3-4 per procedure was there any adverse patient consequence(s) or subsequent medical/surgical intervention? no harm to patients as these are only used to secure chest tubes.Event reported via 2210968-2022-08075, 2210968-2022-08076, and 2210968-2022-08077.
|