MAUDE Adverse Event Report: MAZOR ROBOTICS LTD MAZOR X SYSTEM; ORTHOPEDIC STEREOTAXIC INSTRUMENT

Model Number TPL0059

Device Problem Imprecision (1307)

Patient Problem Discomfort (2330)

Event Date 09/30/2022

Event Type  Injury  

Manufacturer Narrative

Export data files have been received for analysis.Pending completion of analysis.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding a guidance system being used during a spinal procedure.It was reported that after an l2/l3 interbody insertion, during a l2/-l4 screw revision and tlif spinal fusion, the surgeon used the guidance system to insert the first screw at l2 on the left.The procedure went fine.The surgeon then used the guidance system again to place another screw on the right l2 (surgeon was on the patient's left, deviating from standard site's process), the patient bucked during insertion. the surgeon was informed that the patient bucked and decided to continue with the case. post-operatively the patient's right foot had some sensation and was unable to move.The surgeon then went into the operating room to remove the right l2 screw, but the patient's right foot was still unable to move.A post-op ct was completed and revealed that l2 screw was medial.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Additional information received from a manufacturer representative reported that the schanz screw and metal schanz bridge were used to stabilize the patient.The mounting system was attached to the left psis.The procedure was a minimally invasive surgery.

Manufacturer Narrative

H2: a software analysis was initiated to determine the probable cause of the issue through export/log review.Analysis found that the root cause of the deviation was due to a user error.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H2: fdr code corrected.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.

• Brand Name: MAZOR X SYSTEM
• Type of Device: ORTHOPEDIC STEREOTAXIC INSTRUMENT
• Manufacturer (Section D): MAZOR ROBOTICS LTD; 5 shacham street; p.o. box 3104; caesarea hefa,il 30795 67; IS 3079567
• Manufacturer (Section G): MAZOR ROBOTICS LTD; 5 shacham street; p.o. box 3104; caesarea hefa,il 30795 67; IS 3079567
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 15667723
• MDR Text Key: 302358811
• Report Number: 3005075696-2022-00076
• Device Sequence Number: 1
• Product Code: OLO
• UDI-Device Identifier: 07290109183213
• UDI-Public: 07290109183213
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K182077
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 12/08/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 10/25/2022
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: TPL0059
• Device Catalogue Number: TPL0059
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 10/04/2022
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 12/08/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 04/02/2020
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention
• Patient Age: 56 YR
• Patient Sex: Female
• Patient Weight: 130 KG