MAUDE Adverse Event Report: SYNTHES GMBH ZERO-P VA IMPLANT 7MM HEIGHT LORDOTIC-STERILE; INTERVERTEBRAL FUSION DEVICE WITH INTEGRATED FIXATION, CERVICAL

Model Number	04.647.127S
Medical Device Problem Code	Mechanical Problem (1384)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	10/25/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Additional narrative: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.Reporter is a j&j employee.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Device report from synthes reports an event in portugal as follows: it was reported that on (b)(6)2022 when opening a zero p va cervical cage, the cage had the peek separated from the plate.There was no patient consequence.This report involves one (1) zero-p va implant 7mm height lordotic-sterile.This is report 1 of 1 for pc-(b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: d4: lot number added; expiration date added.Udi updated.D9: device returned.H4: manufacture date added.H3, h4, h6: the product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that the zero-p va imp 7mm ht lordotic-st was found fell apart, the root cause cannot be determine.No other defect was found.A dimensional inspection for the zero-p va imp 7mm ht lordotic-st was unable to be performed due to post manufacturing damage.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.The overall complaint was confirmed as the observed condition of the would contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition and hence the root cause cannot be determined.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Drawing/specifications reviewed?: yes, reviewed.Device history lot.Product code: 04.647.127s.Lot number: 460p857.Manufacturing site: mezzovico.Release to warehouse date: 05 nov 2021.Expiration date: 01 oct 2031.A manufacturing record evaluation was performed for the sterile finished lot number, and no non-conformances were identified.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
There was a small delay in surgery in relation to the event.The surgery was completed successfully.

• Brand Name: ZERO-P VA IMPLANT 7MM HEIGHT LORDOTIC-STERILE
• Common Device Name: INTERVERTEBRAL FUSION DEVICE WITH INTEGRATED FIXATION, CERVICAL
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): WERK MEZZOVICO (CH); via cavazz 5; mezzovico 6805 ; SZ 6805
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 15714739
• Report Number: 8030965-2022-09217
• Device Sequence Number: 15103548
• Product Code: OVE
• UDI-Device Identifier: 10705034750736
• UDI-Public: 10705034750736
• Combination Product (Y/N): N
• Initial Reporter Country: PO
• PMA/510(K) Number: K112068
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 04.647.127S
• Device Catalogue Number: 04.647.127S
• Device Lot Number: 460P857
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 10/26/2022
• Supplement Date Received by Manufacturer: 12/20/2022; 12/20/2022
• Initial Report FDA Received Date: 11/02/2022
• Supplement Report FDA Received Date: 01/12/2023; 01/19/2023
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 10/28/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: UNK PLATE.
• Patient Sex: Unknown