MAUDE Adverse Event Report: DEPUY MITEK LLC US LUPINE LOOP RAPIDE ANCHOR W/ORTHOCORD; SOFT-TISSUE ANCHOR, BIOABSORBABLE

Model Number	210711
Medical Device Problem Code	Material Deformation (2976)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/29/2022
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Udi: (b)(4).To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.
Event or Problem Description
This is report 1 of 2 for (b)(4).It was reported by a healthcare professional in china that during an unknown surgery on (b)(6) 2022, it was observed that the anchor on the lupine loop rapide anchor w/orthocord device was deformed upon opening its package.Changed to another one to continue the surgery but the suture broke when tightened.Another like device was used to complete the surgery.There were no adverse consequences to the patient nor surgical delay reported.No additional information could be provided.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary: the complaint devices are not being returned, therefore unavailable for a physical evaluation.However a photo was provided.Upon visual inspection of the photo, it could be observed that the anchor is bent.A manufacturing record evaluation was performed for the finished device 8l94351 number, and no non-conformances were identified.As part of depuy synthes mitek quality process all devices are manufactured, inspected, and released to approved specifications.According with the visual inspection of the photo, this complaint can be confirmed.The possible root cause of this failure can be attributed to the devices were exposed to a temperature higher than the recommended while in stock.Temperatures over 21 degrees celsius and the pre-set tension on the sutures may lead to a bent anchor.As per ifu: store in a cool dry place.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to monitor additional complaint information for potential safety signals through complaint trending as part of post market surveillance.

• Brand Name: LUPINE LOOP RAPIDE ANCHOR W/ORTHOCORD
• Common Device Name: SOFT-TISSUE ANCHOR, BIOABSORBABLE
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer (Section G): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 16017098
• Report Number: 1221934-2022-04086
• Device Sequence Number: 17786518
• Product Code: MAI
• UDI-Device Identifier: 10886705001095
• UDI-Public: 10886705001095
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: K150209
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,User Facility,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 12/31/2024
• Device Model Number: 210711
• Device Catalogue Number: 210711
• Device Lot Number: 8L94351
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 11/29/2022
• Supplement Date Received by Manufacturer: 12/22/2022
• Initial Report FDA Received Date: 12/20/2022
• Supplement Report FDA Received Date: 12/23/2022
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 01/26/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown