MAUDE Adverse Event Report: ENCORE MEDICAL L.P. INSERT, 3D SIZE8 X 9MM R DCM; PROSTHESIS, KNEE, PATELLOFEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, POLYMER/METAL

Model Number	392-09-608
Medical Device Problem Code	Naturally Worn (2988)
Health Effect - Clinical Code	Joint Laxity (4526)
Date of Event	12/19/2022
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Additional reporting on this event will be provided as a supplemental report to this document as soon as it becomes available.
Event or Problem Description
Revision surgery - due to poly wear.
Additional Manufacturer Narrative
The reason for this revision surgery was due to poly wear reported.The previous surgery and the surgery detailed in this event occurred 15 years and 4 months apart.This evaluation is limited in scope as the item associated with this investigation was not returned to djo surgical - austin for examination.The surgery was completed as intended and without incident.If additional information regarding the reported event is submitted at a future date, this investigation will be re-evaluated.There was no information submitted with this complaint about any patient activities, accidents, or medical contraindications that may have contributed to the reported event.There were no findings during this evaluation that indicate the reported device was defective.The surgeon performed this procedure to remedy the patient's condition.No further action is deemed necessary.A review of the device history record (dhr) shows that the reported component used in the previous surgery, when released for use, met design and manufacturing requirements.There was no non-conforming material report (ncmr) associated with the product that may have contributed to the reported event.The device was verified to have gone through an acceptable sterilization process and was within its expiration date at the time of the previous surgery.Customer complaint history of the reported device showed no present trends or on-going issues that are needing a review.The root cause of this complaint was a revision surgery due to worn poly.No information was submitted with the complaint regarding pre-existing conditions of the patient or any activities the patient was involved in that may have contributed to the event.There are multiple factors that may also contribute to an event that are outside the control of djo surgical such as poor bone density, inadequate soft tissue support, patient activities or trauma.
Event or Problem Description
Revision surgery - due to poly wear.

• Brand Name: INSERT, 3D SIZE8 X 9MM R DCM
• Common Device Name: PROSTHESIS, KNEE, PATELLOFEMOROTIBIAL, SEMI-CONSTRAINED, CEMENTED, POLYMER/METAL
• Manufacturer (Section D): ENCORE MEDICAL L.P.; 9800 metric blvd; austin TX 78758
• Manufacturer (Section G): ENCORE MEDICAL L.P; 9800 metric blvd; austin TX 78758
• Manufacturer Contact: james mcmahon ; 9800 metric blvd; austin, TX 78758
• MDR Report Key: 16127439
• Report Number: 1644408-2023-00028
• Device Sequence Number: 19646587
• Product Code: JWH
• UDI-Device Identifier: 00888912120197
• UDI-Public: 00888912120197
• Combination Product (Y/N): N
• Initial Reporter State: MN
• Initial Reporter Country: US
• PMA/510(K) Number: K020114
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2007
• Device Explanted Year: 2022
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Company Representative
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 01/25/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Expiration Date: 02/29/2012
• Device Model Number: 392-09-608
• Device Catalogue Number: 392-09-608
• Device Lot Number: 53851236
• Was Device Available for Evaluation?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 12/19/2022
• Supplement Date Received by Manufacturer: 01/10/2023
• Initial Report FDA Received Date: 01/09/2023
• Supplement Report FDA Received Date: 01/25/2023
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 02/22/2007
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Other
• Patient Age: 75 YR
• Patient Sex: Male