MAUDE Adverse Event Report: ENCORE MEDICAL L.P. EMPOWR 3D KNEE SYSTEM; EMPOWR 3D KNEETM INS, 6R 12MM, VE

Model Number	342-12-706
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	Joint Laxity (4526)
Date of Event	01/25/2023
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
The agent reported "(the patient had instability in both flexion and extension.Doctor increased the thickness of the poly)".The previous surgery and the surgery detailed in this event occurred 1 year apart.This evaluation is limited in scope as the item associated with this investigation was not returned to djo surgical - austin for examination.The surgery was completed as intended and without incident.If additional information regarding the reported event is submitted at a future date, this investigation will be re-evaluated.There was no information submitted with this complaint about any patient activities, accidents, or medical contraindications that may have contributed to the reported event.There were no findings during this evaluation that indicate the reported device was defective.The surgeon performed this procedure to remedy the patient's condition.No further action is deemed necessary.Customer complaint history of the reported device showed no present trends or on-going issues that are needing a review.Inventory containment is not required as there are no indications of a product or process issue affecting implant safety or effectiveness.The revision surgery was completed successfully.A review of the device history record (dhr) shows that the reported component used in the previous surgery, when released for use, met design and manufacturing requirements.There was no non-conforming material report (ncmr) associated with the product that may have contributed to the reported event.The device was verified to have gone through an acceptable sterilization process and was within its expiration date at the time of the previous surgery.The root cause of this complaint was a revision surgery due to instability.No information was submitted with the complaint regarding pre-existing conditions of the patient or any activities the patient was involved in that may have contributed to the event.There are multiple factors that may also contribute to an event that are outside the control of djo surgical such as poor bone density, inadequate soft tissue support, patient activities or trauma.
Event or Problem Description
Revision surgery - instability.

• Brand Name: EMPOWR 3D KNEE SYSTEM
• Common Device Name: EMPOWR 3D KNEETM INS, 6R 12MM, VE
• Manufacturer (Section D): ENCORE MEDICAL L.P.; 9800 metric blvd; austin TX 78758 5445
• Manufacturer (Section G): ENCORE MEDICAL L.P.; 9800 metric blvd; austin TX 78758 5445
• Manufacturer Contact: james mcmahon ; 9800 metric blvd; austin, TX 78758-5445
• MDR Report Key: 16342937
• Report Number: 1644408-2023-00162
• Device Sequence Number: 6419906
• Product Code: FZX
• UDI-Device Identifier: 00888912167437
• UDI-Public: 00888912167437
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: K143242
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2022
• Device Explanted Year: 2023
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Company Representative
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial
• Report Date (Section B): 02/08/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Model Number: 342-12-706
• Device Catalogue Number: 342-12-706
• Device Lot Number: 120T1124
• Was Device Available for Evaluation?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/25/2023
• Initial Report FDA Received Date: 02/09/2023
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 12/09/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Other; Required Intervention
• Patient Age: 74 YR
• Patient Sex: Male