MAUDE Adverse Event Report: OLYMPUS WINTER & IBE GMBH ELECTROSURGICAL GENERATOR "ESG-300", WITH FOOT SWITCH; ELECTROSURGICAL SYSTEM GENERATOR

Model Number	WA90300W
Medical Device Problem Codes	Energy Output Problem (1431); Adverse Event Without Identified Device or Use Problem (2993); Insufficient Device Problem Information (3190)
Health Effect - Clinical Codes	Burn(s) (1757); Hemorrhage/Blood Loss/Bleeding (1888)
Type of Reportable Event	Serious Injury
Event or Problem Description
The user facility reported to olympus that this electrosurgical generator "esg-300", with foot switch caused burns in two patients during an unknown procedure.Additional information has been requested regarding this event.These two events have been recorded under the following patient identifiers: (b)(6) and (b)(6).
Additional Manufacturer Narrative
The device has not been returned to olympus at this time.Additional information has been requested.The investigation is ongoing.A supplemental report will be submitted upon completion of the investigation or if additional information has been received.
Additional Manufacturer Narrative
Updated fields: b1, b5, d8, d9, h6.This report is being supplemented to provide additional information received from the customer as reflected in b5.The suspect device has been returned to olympus.Initial inspection did not reveal any faults.The investigation is ongoing.A supplemental report will be submitted upon completion of the investigation.
Event or Problem Description
Additional information was received from an olympus representative on behalf of the customer.The device reportedly exhibited "too much" cauterization, which caused "too much" tissue whitening without any bleeding at that time.The injury was described as mild.
Event or Problem Description
Additional information was received.An olympus representative reported, on behalf of the customer, that the burns occurred through a non-olympus probe during an unspecified diagnostic procedure.The probe made a white halo that was "really larger than normal" resembling a burn, at least one centimeter around the perimeter.The affected area was the mucus membrane of the cecum.There were a few seconds delay, and then the procedure was completed using a similar device.There was no additional treatment given for the burn.It was also reported that the patient exhibited bleeding post procedure and had to have clips fitted.The patient currently had no further adverse effects.
Additional Manufacturer Narrative
This report is being supplemented to provide additional information received from the customer as reflected in b5.The investigation is ongoing.A supplemental report will be submitted upon completion of the investigation.
Additional Manufacturer Narrative
This report is being supplemented to provide additional information based on the legal manufacturer's final investigation.A review of the device history record found no deviations that could have caused or contributed to the reported issue.It has been over 2 years since the subject device was manufactured.Based on the results of the investigation, the reported issue is a medical complaint.The subject device was inspected and there was no fault detected.This supplemental report includes a correction to e1, e2, e3 and g2 from the previous submissions.Also, new information has been added to h4.Olympus will continue to monitor field performance for this device.

• Brand Name: ELECTROSURGICAL GENERATOR "ESG-300", WITH FOOT SWITCH
• Common Device Name: ELECTROSURGICAL SYSTEM GENERATOR
• Manufacturer (Section D): OLYMPUS WINTER & IBE GMBH; kuehnstrasse 61; hamburg, hamburg 22045 ; GM 22045
• Manufacturer (Section G): OLYMPUS WINTER & IBE GMBH; kuehnstrasse 61; hamburg, hamburg
• Manufacturer Contact: todd brill ; 800 west park drive; westborough, MA 01581 ; 5082077661
• MDR Report Key: 16354518
• Report Number: 9610773-2023-00467
• Device Sequence Number: 15211227
• Product Code: GEI
• UDI-Device Identifier: 04042761085977
• UDI-Public: 04042761085977
• Combination Product (Y/N): N
• Initial Reporter Country: CA
• PMA/510(K) Number: K180200
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Other,Foreign,Health Professional,User Facility
• Initial Reporter Occupation: Biomedical Engineer
• Type of Report: Initial,Followup,Followup,Followup
• Report Date (Section B): 06/29/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: WA90300W
• Device Catalogue Number: WA90300W
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/13/2023
• Supplement Date Received by Manufacturer: 02/15/2023; 03/02/2023; 06/07/2023
• Initial Report FDA Received Date: 02/10/2023
• Supplement Report FDA Received Date: 03/07/2023; 03/27/2023; 06/29/2023
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 05/20/2021
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Reuse
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: ARGON PROBE WITH AN UNKNOWN SERIAL OR LOT NUMBER.
• Outcome Attributed to Adverse Event: Other
• Patient Sex: Unknown