MAUDE Adverse Event Report: SYNTHES GMBH PSI SD800.428 PEEK IMPLANT; PLATE, CRANIOPLASTY, PREFORMED, NON-ALTERABLE

Model Number SD800.428

Device Problem Adverse Event Without Identified Device or Use Problem (2993)

Patient Problem Unspecified Infection (1930)

Event Date 01/01/2023

Event Type  Injury  

Event Description

It was reported that on an unknown date the peek implant was removed due to infection.It is unknown if there was a surgical delay.Procedure and patient outcome were unknown.Psi sd800.428 peek implant.This report is for one (1).This is report 1 of 1 for complaint (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Additional narrative: complainant part is not expected to be returned for manufacturer review/investigation.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Product was not returned.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable device history part number: sd800.428, lot number: 3306p58 , part manufacture date: 11-23-2022, manufacturing location: brandywine , part expiration date: n/a , nonconformance noted: n/a.A review of the device history record of this lot revealed no complaint-related anomalies.The device history record shows that the peek patient specific implant (psi) was processed through all operations on the released routing for part number sd800.428 and met all inspection specification requirements at the time of release with no issues documented during manufacture that would contribute to the complaint condition.The product lot met all specification criteria at the time of release with no issues documented that would contribute to the complaint condition.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: PSI SD800.428 PEEK IMPLANT
• Type of Device: PLATE, CRANIOPLASTY, PREFORMED, NON-ALTERABLE
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 16466423
• MDR Text Key: 310495015
• Report Number: 8030965-2023-02543
• Device Sequence Number: 1
• Product Code: GXN
• UDI-Device Identifier: 10887587065014
• UDI-Public: (01)10887587065014
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K053199
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/02/2023
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Model Number: SD800.428
• Device Catalogue Number: SD800.428
• Device Lot Number: 3306P58
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 03/21/2023
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 11/23/2022
• Is the Device Single Use?: Yes
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Patient Outcome(s): Required Intervention