|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Procodes: mni and kwp.Device available for evaluation: complainant part is not expected to be returned for manufacturer review/investigation.Without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Device report from synthes reports an event in canada as follows: after a corpectomy completed on (b)(6) 2023, the implant became displaced and the superior portion of the construct slipped forward.This patient required a revision surgery completed on (b)(6) 2023 where new implants were used.The patient requires revision surgery or hardware removal.Hardware/explant removal due to: -- implant expulsion through locking plate., patient had revision surgery on (b)(6) 2023 there was outcome/consequences.Patient had infection.There were other medical intervention; revision surgery, ct and x-rays.There is no information.This report is for one (1)4.0mm ti cortex exphd scr slf-tap 14mm.This is report 7 of 8 for complaint (b)(4).
|