ETHICON ENDO-SURGERY, LLC. XCEL DILATING TIP TROCAR 12MM; LAPAROSCOPE, GENERAL AND PLASTIC SURGERY
|
Back to Search Results |
|
Model Number D12LT |
Device Problems
Manufacturing, Packaging or Shipping Problem (2975); Material Integrity Problem (2978)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/21/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).Batch#: unk.A manufacturing record evaluation is pending.A photo analysis is pending.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
It was reported that when unpacking and checking the trocar preoperatively, it was noticed that the seal to the shaft was missing.No patient involvement.No patient harm nor significant delay reported.Procedure finished with same like device.
|
|
Manufacturer Narrative
|
(b)(4).Date sent: 4/7/2023.D4: batch # 179c66.This is an analysis for a photo submitted to ethicon for evaluation.During the visual analysis, the following was observed: the photos show a tip trocar 12mm with the missing duckbill.Based on the photo review, the event describe is confirmed, however no conclusion or root cause could be determined.Hands on device analysis may provide the additional evidence necessary to confirm the root cause of the reported event.Because the instrument was not returned our evaluation is limited.We value the opportunity to fully analyze the instrument upon its return.Investigation summary: the product was returned to ethicon for evaluation.Visual inspection was conducted on the returned device.Visual analysis of the returned sample determined that the d12lt device was received with the duckbill out of position.In addition, the duckbill was not returned.No conclusion could be reached as to what might have caused the duckbill out of position.As part of ethicon¿s quality process all devices are manufactured, inspected, and released to approved specifications.A manufacturing record evaluation was performed for the finished device batch number, and no non-conformances were identified.
|
|
Search Alerts/Recalls
|
|
|