MAUDE Adverse Event Report: OSCOR.INC OCCLUTECH DELIVERY SET III; INTRODUCER, CATHETER

Model Number	98DS009
Medical Device Problem Code	Fluid/Blood Leak (1250)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2023
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Conclusion not yet available, evaluation in process.A follow-up report will be submitted as soon as the investigation is complete.Oscor inc.Is submitting the above report to comply with 21 cfr part 803, the medical device reporting regulation.The report is based upon information obtained by oscor inc.Which the company may not have been able to investigate or verify prior to the date the report was required by fda.This report does not constitute an admission that the device, oscor inc., or its employees, caused or contributed to the event described in this report.Nor does this report reflect a conclusion by fda, oscor inc., or its employees, that the report constitutes an admission that the device, oscor inc., or its employees caused or contributed to the event described in this report.
Event or Problem Description
During tests of the new ods ill in 3 hospitals with a total of 4 odsiii there was a leakage at the hemostatic valve of the loader in all 4 odsiii, when they worked with the contrast media pump (flow 15musec; volume 20ml).They tried to handle it with less flow/min (flow 1 0mumin, volume 15ml) with the same result: a contrast medium jet sprayed out through the hemostatic valve.At least a part of the contrast media arrived at the target to verify the position of the occluder.All three hospitals decided to continue with the older ods version, as they never had this issue with the screw mechanism.These hospitals perform there pfo-closures only with fluoroscopy and contrast media and to have a save evaluation of the device position, they are reliant to the contrast media pump.There was no harm of any patient.This event is addressed under (b)(4).Second event is addressed under (b)(4).Third event is addressed under (b)(4).
Additional Manufacturer Narrative
No product was returned to oscor inc.For evaluation; however, a complaint notification was provided.Without the return of the actual device in question for evaluation, oscor inc.Is unable to determine the exact cause for this incident.A review of the manufacturing processes indicates the production operators are instructed to 100% visually inspect for any obvious defect prior to shipment.At this time, it is not possible to assign a definitive root cause for the event as reported.The complaint is non-verifiable as the product was not returned for evaluation.No corrections or corrective actions will be taken.Device was not returned for analysis and review of the manufacturing documents did not reveal any discrepancies that would have contributed to this event.This complaint is non-verifiable.Oscor inc.Is submitting the above report to comply with 21 cfr part 803, the medical device reporting regulation.The report is based upon information obtained by oscor inc.Which the company may not have been able to investigate or verify prior to the date the report was required by fda.This report does not constitute an admission that the device, oscor inc., or its employees, caused or contributed to the event described in this report.Nor does this report reflect a conclusion by fda, oscor inc., or its employees, that the report constitutes an admission that the device, oscor inc., or its employees caused or contributed to the event described in this report.

• Brand Name: OCCLUTECH DELIVERY SET III
• Common Device Name: INTRODUCER, CATHETER
• Manufacturer (Section D): OSCOR.INC; 3816 desoto blvd.; palm harbor FL 34683
• Manufacturer (Section G): OSCOR.INC; 3816 desoto blvd.; palm harbor FL 34683
• Manufacturer Contact: daniel naut ; 3816 desoto blvd.; palm harbor
• MDR Report Key: 16618573
• Report Number: 1035166-2023-00043
• Device Sequence Number: 7211417
• Product Code: DYB
• UDI-Device Identifier: 00885672010270
• UDI-Public: 00885672010270
• Combination Product (Y/N): N
• Initial Reporter Country: WZ
• PMA/510(K) Number: K210627
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Distributor
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 07/14/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 08/01/2025
• Device Model Number: 98DS009
• Device Catalogue Number: 98DS009
• Device Lot Number: DP-16709
• Was Device Available for Evaluation?: No
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 02/27/2023
• Supplement Date Received by Manufacturer: 06/19/2023
• Initial Report FDA Received Date: 03/27/2023
• Supplement Report FDA Received Date: 07/14/2023
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 08/26/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown