MAUDE Adverse Event Report: DEPUY MITEK LLC US RIGIDFIX FEMORAL BTB GUIDE FRAME N/S 1PK; BONENAIL GUIDEWIRE

Model Number	213702
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Event or Problem Description
This is report 2 of 2 for (b)(4).It was reported by the affiliate in italy that there was rupture of the rigidfix femoral/tibial rod thumb screw into the rigidfix femoral btb guide frame n/s device while in use together.There was no procedure nor patient involvement reported.No additional information was provided.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Udi: (b)(4) incomplete the lot number was unknown.The lot number was unknown; therefore, the expiration date, manufacturing site name and device manufacture date were unknown.Reporter is a j&j employee.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.The actual device has been returned and is currently pending evaluation.Once reliability engineering evaluates the device, a supplemental medwatch report will be sent accordingly.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Investigation summary : the product was returned to mitek for evaluation.Mitek then conducted visual of the device received.Visually, the device appears worn indicating device was heavily used due to it had a lot of marks of wear and scratches.The rigidfix fem/tib rod thumbscr was not in the guide due to the damage in the screw.Given that no lot number was provided, a manufacturing record evaluation (mre) review cannot be performed.If the lot number becomes available, the mre review will be performed.Based on condition of the device, this complaint can be confirmed.Since this is a reusable device, this failure has possibly occurred after using it in this manner for many procedures.This failure can be attributed to the repeated use of the device causing normal wear and tear.However, it cannot be conclusively affirmed.As per ifu: end of useful instrument life is generally determined by wear or damage from handling or surgical use.Inspect instruments between uses to verify proper functioning.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to monitor additional complaint information for potential safety signals through complaint trending as part of post market surveillance.

• Brand Name: RIGIDFIX FEMORAL BTB GUIDE FRAME N/S 1PK
• Common Device Name: BONENAIL GUIDEWIRE
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 16756015
• Report Number: 1221934-2023-01678
• Device Sequence Number: 3429558
• Product Code: LXH
• UDI-Device Identifier: 10886705002962
• UDI-Public: 10886705002962
• Combination Product (Y/N): N
• Initial Reporter Country: IT
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,User Facility,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 213702
• Device Catalogue Number: 213702
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 03/31/2023
• Supplement Date Received by Manufacturer: 06/08/2023; 06/19/2023
• Initial Report FDA Received Date: 04/17/2023
• Supplement Report FDA Received Date: 06/09/2023; 06/20/2023
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Patient Sex: Unknown