MAUDE Adverse Event Report: SYNTHES GMBH SYNPOR SQUARE SHEET-SILE 50X50/0.8 THICK; PLATE, CRANIOPLASTY, PREFORMED, ALTERABLE

Model Number	08.510.120S
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	03/01/2023
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: d9: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.H3, h6: the investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Device report from synthes reports an event in china as follows: it was reported that on (b)(6) 2023, during the surgery the device was found broken.Second set of device was used to continue the surgery, but the same problem happened again.Third set device was used to complete the surgery.No adverse consequences to the patient.No additional information could be provided.This report is for one (1) synpor square sheet-sterile 50mmx50mm/0.8mm thick.This is report 2 of 3 for complaint (b)(4).
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Investigation summary: product was not returned.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device history lot: part: 08.510.120s.Lot no: ds7008284.Release to warehouse date: 21 dec, 2021.Expiry date: 01 nov, 2026.Manufacturing site: werk selzach.Supplier: (b)(4).A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: SYNPOR SQUARE SHEET-SILE 50X50/0.8 THICK
• Common Device Name: PLATE, CRANIOPLASTY, PREFORMED, ALTERABLE
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 16765635
• Report Number: 8030965-2023-04871
• Device Sequence Number: 6182041
• Product Code: GWO
• UDI-Device Identifier: 10887587026039
• UDI-Public: (01)10887587026039
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: K051879
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 08.510.120S
• Device Catalogue Number: 08.510.120S
• Device Lot Number: DS7008284
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 03/30/2023
• Supplement Date Received by Manufacturer: 05/01/2023
• Initial Report FDA Received Date: 04/18/2023
• Supplement Report FDA Received Date: 05/16/2023
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 12/21/2021
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: SYNPOR SQUARE SHEET-SILE 50X50/0.8 THICK.; SYNPOR SQUARE SHEET-SILE 50X50/0.8 THICK.
• Patient Sex: Unknown