MAUDE Adverse Event Report: MEDOS INTERNATIONAL SARL VAPR COOLPULSE CURVE SUCTION ELECTRODE XL; ENDOSCOPIC ELECTROSURGICAL ELECTRODE, BIPOLAR, SINGLE USE

Model Number	225032
Medical Device Problem Codes	Infusion or Flow Problem (2964); Output Problem (3005)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	04/25/2023
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: udi: (b)(4).D4: the expiration date is currently unavailable.H4: the device manufacture date is currently unavailable.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.
Event or Problem Description
This is report 1 of 2 for (b)(4).It was reported by a healthcare professional in switzerland that during an unknown procedure of the hip on (b)(6) 2023, two vapr coolpulse curve suction electrode xl devices were used.According to the report, the first electrode clogged and thus blocked the suction.It was reported that they were able to still clean the electrode a few times so that the suction worked again, but at some point this device was no longer of any use.It was reported that the second electrode clogged the first time after only five minutes of use.It was reported that with repeated cleaning, this one worked until the end of the operation despite the suction was not as usual.There were no adverse patient consequences nor surgical delay reported.No additional information was provided.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.The actual device has been returned and is currently pending evaluation.Once reliability engineering evaluates the device, a supplemental medwatch report will be sent accordingly.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by mitek or its employees that the report constitutes an admission that the device, mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary: the device was received and evaluated.Visual inspection revealed that the electrode is in used condition.The cable and the suction tube were cut by the customer.A functional test cannot be performed, however the device will be sent to the manufacturer for further review of the internal components and suction issue.Manufacturer evaluation result for coolpulse curve xl: device was not returned in the original packaging.Distal tip is in a used state.The cable and suction tube of the device has been cut close to the handle.The shaft has a slight bend in it.The device just failed specification by 2ml/min in a flow test, so the customers complaint can be substantiated.The device was found to pass the flow rate specification after cleaning tissue from the suction holes.An evaluation on the second device has confirmed that it had no flow initially caused by a blockage and passed the flow rate specification after cleaning tissue from the suction holes.A manufacturing record evaluation was performed for the finished device number, and no non-conformances were identified.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to monitor additional complaint information for potential safety signals through complaint trending as part of post market surveillance.
Additional Manufacturer Narrative
This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: h4: the device manufacture date was reported as unknown on the initial report; and has been updated accordingly.

• Brand Name: VAPR COOLPULSE CURVE SUCTION ELECTRODE XL
• Common Device Name: ENDOSCOPIC ELECTROSURGICAL ELECTRODE, BIPOLAR, SINGLE USE
• Manufacturer (Section D): MEDOS INTERNATIONAL SARL; chemin blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer (Section G): MEDOS INTERNATIONAL SARL; chemin-blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 16897167
• Report Number: 1221934-2023-01982
• Device Sequence Number: 20411250
• Product Code: GEI
• UDI-Device Identifier: 10886705027965
• UDI-Public: 10886705027965
• Combination Product (Y/N): N
• Initial Reporter Country: SZ
• PMA/510(K) Number: K143475
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,User Facility,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 225032
• Device Catalogue Number: 225032
• Device Lot Number: U2203117
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 04/25/2023
• Supplement Date Received by Manufacturer: 06/13/2023; 08/18/2023; 08/23/2023
• Initial Report FDA Received Date: 05/09/2023
• Supplement Report FDA Received Date: 06/14/2023; 08/22/2023; 08/23/2023
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 04/01/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown