MAUDE Adverse Event Report: ETHICON INC. PDSII CLR 18IN 5-0 S/A P-3 PRM MP; SUTURE, SURGICAL, ABSORBABLE

Model Number	Z493G
Medical Device Problem Codes	Break (1069); Material Twisted/Bent (2981)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	05/19/2023
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint #: (b)(4).H6.Component code: g07002 - device not returned.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.Additional information was requested, and the following was obtained: did the needle fall into the patient? the broken needle was found in the needle holder and did not fall into the body.Event related to mw # 2210968-2023-03869.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Event or Problem Description
It was reported that a patient underwent an unknown procedure on (b)(6) 2023 and suture was used.The needle tip was easily bent and then broken during interrupted suture.No adverse patient consequences were reported.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 6/5/2023 additional information was requested, the following was obtained: * did the needle fall into the patient?=>no if yes, * was the needle piece removed from the patient during the same procedure? * were x-rays taken to locate the needle? * was there any patient consequence or injury? * what is the patient¿s current health status and condition? * was any other tissue damaged as a result of searching the needle? * what measures were taken to retrieved the broken piece? * please perform and document the follow up attempt for product return.Please document the shipment tracking number in notes or rmao sections.We regularly contact with sales rep about the device returning.* please provide the source or name of person providing answers to follow-up questions (not the person relaying/submitting answers to loc or chu).Hiromi tokuyama this report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Related reports: 2210968-2023-03869 & 2210968-2023-03870.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 7/7/2023.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon inc, or its employees that the report constitutes an admission that the product, ethicon inc or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Related reports: 2210968-2023-03869.

• Brand Name: PDSII CLR 18IN 5-0 S/A P-3 PRM MP
• Common Device Name: SUTURE, SURGICAL, ABSORBABLE
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; avenida de las torres 7125; col salvacar; ciudad juarez 32604 ; MX 32604
• Manufacturer Contact: elba bello ; 1000 route 202; raritan, NJ 08869 ; 9083863534
• MDR Report Key: 17009444
• Report Number: 2210968-2023-03870
• Device Sequence Number: 6872443
• Product Code: NEW
• UDI-Device Identifier: 10705031061156
• UDI-Public: 10705031061156
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: N18331
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 07/07/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: Z493G
• Device Catalogue Number: Z493G
• Device Lot Number: SKMPBS
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 05/22/2023
• Supplement Date Received by Manufacturer: 06/05/2023; 06/21/2023
• Initial Report FDA Received Date: 05/26/2023
• Supplement Report FDA Received Date: 06/06/2023; 07/07/2023
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 09/23/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown