MAUDE Adverse Event Report: COOK INC FLEXOR RAABE GUIDING SHEATH; DYB INTRODUCER, CATHETER

Model Number	G13069
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	06/02/2023
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Blank fields on this form indicate the information is unknown or unavailable.E1: customer name and address= phone: (b)(6).This report includes information known at this time.A follow-up report will be submitted should additional relevant information become available.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
Event or Problem Description
As reported, during a percutaneous transluminal angioplasty and placement of a stent, the tips of two flexor raabe guiding sheaths completely broke off.The separated fragments were retrieved endovascularly.An unknown wire was used during the procedure.A section of the device did not remain inside the patient¿s body.The patient did not require any additional procedures due to this occurrence.According to the initial reporter, the patient did not experience any adverse effects due to this occurrence.
Additional Manufacturer Narrative
Blank fields on this form indicate the information is unknown, unchanged, or unavailable.Summary of event: as reported, during a percutaneous transluminal angioplasty and placement of a stent, the tips of two flexor raabe guiding sheaths completely broke off.The separated fragments were retrieved endovascularly.An unknown wire was used during the procedure.A section of the device did not remain inside the patient¿s body.The patient did not require any additional procedures due to this occurrence.According to the initial reporter, the patient did not experience any adverse effects due to this occurrence.Investigation evaluation: reviews of the complaint history, device history record, instructions for use (ifu), manufacturing instructions, and quality control procedures were conducted during the investigation.The complaint devices were not returned to cook for investigation.A document-based investigation evaluation was performed.No related non-conformances were found, and there have been no other reported complaints for this lot number.The product ifu states "if resistance is encountered during sheath advancement, assess cause of resistance and consider dilation of any restriction identified or consider alternate treatment strategy.If flexor sheath is advanced through resistance, force to remove the sheath will be higher, increasing the risk of sheath material or hub separation upon withdrawal.¿ a previously closed capa found that the thin wall of the ptfe liner was susceptible to damage from handling and processing during profiling and coiling processes; leading to an increased susceptibility to shaft separation.Corrective actions were implemented, including 100% bond inspections, increase of the minimum allowable tensile strength, improvements to the baking process, and reduction in shelf life of inner liner raw material.The complaint devices were manufactured prior to implementation of the corrective actions.The information provided upon review of the dmr, dhr, and ifu suggests that there is evidence the devices were manufactured to specification at the time of manufacture.There is no evidence of non-conforming devices in-house or in the field.Cook has concluded that sufficient inspection activities are in place to identify this failure mode prior to distribution.Based on the information provided and the results of the investigation, cook has concluded that a manufacturing deficiency, related to susceptibility of shaft separation due to the thin wall of the ptfe liner, contributed to this event; however, the complaint devices were manufactured prior to implementation of corrective actions.Details of the patient¿s anatomy are unknown, and it is unknown if the dilator was in place at the time of sheath removal.The risk analysis for this failure mode was reviewed and no additional escalation was required.The appropriate personnel have been notified and cook will continue to monitor for similar events.This report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
Event or Problem Description
No additional information regarding the patient and/or event has been received since the previous medwatch report was sent.

• Brand Name: FLEXOR RAABE GUIDING SHEATH
• Common Device Name: DYB INTRODUCER, CATHETER
• Manufacturer (Section D): COOK INC; 750 daniels way; bloomington IN 47404
• Manufacturer (Section G): COOK INC.; 750 daniels way; bloomington IN 47404
• Manufacturer Contact: jason crouch ; 750 daniels way; bloomington, IN 47404 ; 8123392235
• MDR Report Key: 17145328
• Report Number: 1820334-2023-00770
• Device Sequence Number: 5744483
• Product Code: DYB
• UDI-Device Identifier: 00827002130692
• UDI-Public: (01)00827002130692(17)230204(10)10307710
• Combination Product (Y/N): N
• PMA/510(K) Number: K142829
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Other,Foreign,User Facility,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 09/13/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 02/04/2023
• Device Model Number: G13069
• Device Catalogue Number: KCFW-5.0-38-90-RB-RAABE
• Device Lot Number: 10307710
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 06/02/2023
• Supplement Date Received by Manufacturer: 08/16/2023
• Initial Report FDA Received Date: 06/16/2023
• Supplement Report FDA Received Date: 09/13/2023
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 02/04/2020
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Sex: Unknown