MAUDE Adverse Event Report: DEPUY INTERNATIONAL LTD - 8010379 HARDINGE CEM REST INTRO LONG; HIP INSTRUMENTS : INSERTION DEVICES

Catalog Number	963206000
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	07/25/2023
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint #(b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Device report from depuy synthes portugal reports an event as follows: it was reported that a harding restrict broke during insertion.There was no patient consequence or surgical delay.
Event or Problem Description
Additional information received states that the instruments was broken into 3 pieces.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: added: b5.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary : harding restrict has been broken while inserting the harding restrict.The product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis found the device was broken from the adhesive that fixes the tee bar of the handle and the shaft together.The tee bar is missing.Additionally the device shows traces of normal usage.No other defect was found.The observed condition of the device was consistent with a component failure that may have been caused by exposure to unintended forces.A dimensional inspection was not performed since it was not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of the hardinge cem rest intro long would contribute to the complained device issue.Based on the investigation findings, the potential cause is not established as no further conclusion could be drawn without the missing component., and it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot : a search of the depuy nonconformance (nc) quality system found no nc¿s associated with this product/lot combination.

• Brand Name: HARDINGE CEM REST INTRO LONG
• Common Device Name: HIP INSTRUMENTS : INSERTION DEVICES
• Manufacturer (Section D): DEPUY INTERNATIONAL LTD - 8010379; st. anthony's road; leeds LS11 8DT; UK LS11 8DT
• Manufacturer (Section G): DEPUY INTL LTD. 8010379; st anthonys road; leeds LS11 8 DT; UK LS11 8 DT
• Manufacturer Contact: kate karberg ; 700 orthopaedic dr.; warsaw, IN 46581-0988 ; 3035526892
• MDR Report Key: 17414710
• Report Number: 1818910-2023-15496
• Device Sequence Number: 17937549
• Product Code: HWR
• UDI-Device Identifier: 10603295246015
• UDI-Public: 10603295246015
• Combination Product (Y/N): N
• Initial Reporter Country: PO
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup
• Report Date (Section B): 07/28/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 963206000
• Device Lot Number: 00PN37078
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 07/25/2023
• Supplement Date Received by Manufacturer: 10/07/2023; 11/07/2023; 11/22/2023
• Initial Report FDA Received Date: 07/28/2023
• Supplement Report FDA Received Date: 10/17/2023; 11/09/2023; 11/23/2023
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown